Keep brake fluid moving to the back of your Jeep with the Centric Parts brake hydraulic hose 150.67335, a direct-fit replacement for the listed 1997-2006 Jeep Wrangler and 1997-2006 Jeep TJ applications. It is cataloged for the rear, rear upper position. See the "Vehicles it fits" section for engine details.
A brake hose is the flexible link in the hydraulic brake system. It carries pressurized brake fluid between the vehicle's rigid brake lines and the brakes, and it flexes as the suspension and axle move.
- Rear upper position: Cataloged for the rear, rear upper location on the listed applications.
- Wide coverage: Centric's brake hose range is built around some of the widest application coverage in the aftermarket.
- Quality replacement: Offered by Centric as a top-quality aftermarket replacement for a worn or damaged hose.
- Full hydraulic program: Centric's brake hydraulic lineup, one of the most complete and up-to-date in the industry, also covers master and wheel cylinders plus caliper and wheel cylinder repair kits.
Signs this part may need replacing: cracks, bulges or chafing on the hose, brake fluid seeping at the fittings, a soft or spongy pedal, or rear brakes that drag. If a failed hose is the cause, this part replaces it. The hydraulic system must be bled after installation.
Interchange: B916917 · HB87335 · 78780 · 18039390 · 18J1423 · 8740335 · H380889 · H622071 · E15572340 · 380889 · 52008391 · BH380889 · 2203390 · 223390 · BH139926 · F139926
This part cross-references / interchanges with the following part numbers:
B916917, HB87335, 78780, 150.67335, 18039390, 18J1423, 8740335, H380889, H622071, E15572340, 380889, 52008391, BH380889, 2203390, 223390, BH139926, F139926
Frequently Asked Questions
What does this brake hose do?
It carries brake fluid between the rigid brake lines and the rear brakes. It flexes as the suspension and axle move so hydraulic pressure still reaches the brakes.
Which vehicles does this brake hose fit?
It is a direct-fit replacement for the 1997-2006 Jeep Wrangler and 1997-2006 Jeep TJ. See the "Vehicles it fits" section for full application details.
Where is this hose installed?
The catalog lists it for the rear, rear upper position on the listed applications.
What are signs a brake hose may need replacing?
Signs of a hose problem include a cracked, bulging or chafed hose, fluid leaks at the fittings, a soft or spongy pedal, or brakes that drag. Diagnose the cause before replacing any part.
Do I need to bleed the brakes after installing it?
Yes. Replacing a brake hose opens the hydraulic system, so the brakes must be bled afterward. Follow the vehicle service information for the bleeding procedure and fitting torque.
