Centric Parts 141.42564 rear left brake caliper for the 2003-2008 Infiniti FX35 and other vehicles squeezes the pads onto the rotor to slow the wheel. This remanufactured, semi-loaded caliper comes without brake pads.
Pulling to one side, uneven pad wear or brake fluid around the wheel can mean a disc brake caliper is failing. These signs alone don't prove the caliper is the problem; a worn brake hose can cause a pull too.
This rear left caliper fits the 2003-2008 Infiniti FX35 and the 2003-2008 Infiniti FX45. The rear right side is a separate part, and the two sides are normally replaced together.
Fit and size
Build and materials
One remanufactured rear left brake caliper with its bleeder screw; hardware and brackets are included where applicable. Brake pads are not included. The rear left takes one caliper, and the rear right side is ordered separately.
Interchange: 113-5494-6 · 242-73337A
0772165C · 0772165S · 19B2786 · 192786 · 2786 · 3512 · 4311 · SLC6139 · 61224522 · SE3337 · SE3337A · 126323 · 2200618L · 44011CG010 · 44011CG012 · 44011CL70B · 63732 · 107172S · CR139301 · CRB139301
This part cross-references / interchanges with the following part numbers:
Is Centric Parts 141.42564 one of the rear left calipers for the 2003-2008 Infiniti FX35 and the 2003-2008 Infiniti FX45?
Yes. Centric Parts 141.42564 is a rear left brake caliper for the 2003-2008 Infiniti FX35 and the 2003-2008 Infiniti FX45. The rear right side takes its own caliper.
Does the Centric Parts 141.42564 caliper come with brake pads?
No. Centric Parts 141.42564 is a semi-loaded caliper and comes without brake pads. It includes a bleeder screw, plus hardware and brackets where applicable.
What mount thread size does this rear left caliper use?
The mount thread size is M12-1.25. This caliper also needs a bracket; the bracket number is 147.42563.
How can I tell if a rear brake caliper is sticking?
Uneven pad wear, a pull to one side or a burning smell after driving can mean a caliper is sticking. A brake that drags should be inspected promptly by a shop.
Is the Centric Parts 141.42564 caliper pressure tested?
Yes. This remanufactured caliper is 100% pressure tested and inspected for proper operation and fitment. It is tumble blasted, then given a rust-preventative finish.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
