Centric Parts 141.50505 rear right brake caliper for the 2016-2017 Hyundai Tucson and other vehicles clamps the brake pads against the rotor to slow the wheel. This remanufactured, semi-loaded disc brake caliper mounts at the rear right wheel.
- Remanufactured and tumble blasted to reach like-new condition
- Anti-corrosion finish applied after tumble blasting for rust protection
- 100% pressure tested and inspected to confirm proper operation
- Semi-loaded caliper with bleeder screw included
Quick facts
- Part: Centric Parts 141.50505 brake caliper
- Also called: disc brake caliper
- Fits: 2016-2017 Hyundai Tucson and other vehicles
- Position: Rear right
- Condition: Remanufactured
Brake fluid around the caliper, a car that pulls to one side or a wheel that runs hot can point to a caliper problem. Before you replace this caliper, rule out worn pads or a damaged brake hose as the cause.
Fits
This caliper fits the 2016-2017 Hyundai Tucson and the 2014-2016 Kia Cadenza. The 2016-2017 Hyundai Tucson takes one caliper at the rear right. This listing is that side only; the rear left caliper on the same axle is a separate part and is normally replaced at the same time.
Specifications
Fit and size
- Position: rear right
- Quantity at this position: 1
- Mount thread size: M10-1.25
- Mount spread, center to center: 100.0 mm
- Bracket air gap: 15.0 mm
- Body air gap: 43.0 mm
- Bracket: required
Build and materials
- Type: semi-loaded caliper
- Finish: rust preventative
- Bleeder screw: included
- Condition: remanufactured
- Country of origin: United States
In the box
One rear right brake caliper, with hardware and brackets where applicable. Brake pads are not included.
Interchange: 1HJ · 24283216 · 582303R600 · 582304W100 · 583113RA60 · 583114WA10
This part cross-references / interchanges with the following part numbers:
Frequently Asked Questions
Is this the right brake caliper for the 2016-2017 Hyundai Tucson rear right?
Yes. Centric Parts 141.50505 is the rear right caliper for the 2016-2017 Hyundai Tucson, and it also fits the 2014-2016 Kia Cadenza at that position.
Does the Centric Parts 141.50505 caliper come with brake pads?
No. Centric Parts 141.50505 is a semi-loaded caliper without brake pads. Hardware and brackets are included where applicable, and the bleeder screw is included.
What thread size and mount spread does this rear right brake caliper have?
The mount thread size is M10-1.25 and the mount spread is 100.0 mm center to center. A bracket is required for this caliper.
How can I tell if this rear right caliper is sticking or leaking?
During a brake service, fluid around the caliper or unevenly worn pads can be a sign. A pull to one side in normal driving can be too, and a shop can test the caliper.
Does OE number 582303R600 match Centric Parts 141.50505?
Yes. 582303R600 is an OE number on the Interchange line for Centric Parts 141.50505, so a shopper searching by that number will find this caliper.
Reviews
No reviews yet — be the first to review this product.
Write a ReviewWrite a Review