Centric Parts Disc Brake Rotor P/N:320.35063H

Give your rear brakes a fresh, smooth friction surface with the Centric Parts disc brake rotor 320.35063H, a vented rear rotor with curved internal vanes and a fully coated finish. It fits many vehicles, among them the 2015-2017 Mercedes-Benz CLS400, 2006-2016 Mercedes-Benz E350 and 2013-2016 Mercedes-Benz E400, as a direct-fit replacement for the listed applications. See the Buyer's Guide tab for the full list.

• Vented design with curved vanes: internal vanes between the two braking faces are designed to help carry heat away during repeated stops.
• Fully coated finish: the disc is fully coated and the hat has a coated finish.
• Smooth surface: a smooth braking surface for the pads to clamp against.
• Key dimensions: 300 mm (11.811 in) outside diameter, 22 mm (0.866 in) nominal thickness, 19.4 mm (0.764 in) discard thickness, 68.3 mm (2.689 in) overall height and a 67 mm (2.638 in) center hole, with five 15 mm (0.591 in) lug holes on a 112 mm (4.409 in) bolt circle.

A brake rotor turns with the wheel and gives the pads a surface to clamp against, turning motion into heat to slow the vehicle. Normal wear gradually thins the rotor, and heat or debris can score or distort its surface. A pulsating pedal, grinding noise, deep grooves or a rotor worn to its discard thickness are signs it may need replacing.

This listing is for one rotor. The listed applications use two rear rotors, so replacing both sides together as a matched pair is recommended for even, balanced braking. An ABS tone ring and bearings are not included.