VALEO 52405623 clutch flywheel conversion kit for the 2009-2014 Volkswagen Jetta 4-cylinder 2.0L and other vehicles replaces the dual mass flywheel (DMF) with a solid flywheel.
- Valeo Conversion Kit design places the long travel damper in the clutch disc
- Friction plate with higher damper capacity filters noise, vibration and harshness
- F510 friction material, an organic compound with higher copper content for heat dissipation
- Solid flywheel with increased clamp load from the clutch cover (pressure plate) raises torque transfer efficiency
Quick facts
- Part: VALEO 52405623 clutch flywheel conversion kit
- Fits: 2009-2014 Volkswagen Jetta 4-cylinder 2.0L and other vehicles
- Condition: New
A worn clutch or a failing dual mass flywheel can show up as a rattle at idle, vibration or a slipping clutch. Before you replace this kit, rule out other causes of the same symptoms, such as worn engine or transmission mounts.
Fits
It fits the 2009-2014 Volkswagen Jetta 4-cylinder 2.0L and the 2010-2011 Volkswagen Golf 4-cylinder 2.0L, and either car takes a single kit.
Specifications
- Quantity per vehicle: 1
- Type: conversion kit with a single mass flywheel in place of the dual mass flywheel
- Condition: New
- Warranty: Valeo 600,000 mile warranty on the single mass flywheel
- Country of origin: Spain
In the box
Clutch disc, clutch cover (pressure plate), flywheel, and slave cylinder with release bearing.
Installation notes
- Bolt-on installation
- No special tools or pre-loading required
Interchange: 02-057
03L141016N · 03L141016NX · 444101 · DMF123
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
03L141016N, 03L141016NX, 444101, 02-057, DMF123, Not available
Frequently Asked Questions
Does the VALEO conversion kit fit the 2010-2011 Volkswagen Golf 4-cylinder 2.0L?
Yes. VALEO 52405623 fits the 2010-2011 Volkswagen Golf 4-cylinder 2.0L and also the 2009-2014 Volkswagen Jetta 4-cylinder 2.0L. Each car takes one kit.
What parts come in this VALEO flywheel conversion kit?
VALEO 52405623 includes a clutch disc, a clutch cover (pressure plate), a flywheel, and a slave cylinder with release bearing.
What friction material does this conversion kit use?
The kit uses F510 friction material, an organic compound with higher copper content that helps dissipate heat.
Do I need special tools or pre-loading to install this kit?
No. This bolt-on kit needs no special tools or pre-loading.
How long is the warranty on the flywheel in this kit?
Valeo gives a 600,000 mile warranty on the single mass flywheel.
