MOOG Chassis Products CC865 rear coil spring set for the 1998-2011 Ford Crown Victoria and other vehicles supports the rear of the car and carries the load over bumps.
- Variable-rate coil with a spring rate of 163 lbs per inch
- 100% load tested
- Pigtail ends at both ends of the coil
- Designed to lower stresses for longer service life
- Design enhancements aimed at longer product life and simpler installation and replacement
Quick facts
- Part: MOOG Chassis Products CC865 coil spring set
- Fits: 1998-2011 Ford Crown Victoria and other vehicles
- Position: Rear
- Condition: New
Worn or sagging springs can lead to premature tire wear from misalignment, and a rear end that sits low is another sign. Before you replace the spring, rule out other rear suspension wear, such as tired shocks or worn bushings, as the source of the symptom.
Fits
This coil spring set suits the 1998-2011 Ford Crown Victoria, the 1998-2011 Mercury Grand Marquis and the 1994-2011 Lincoln Town Car. The fitment counts one per application, so this listing is a single rear spring; the other side of that axle is normally done at the same time.
Specifications
Fit and size
- Position: Rear
- Quantity per application: 1
- Free height: 387.4 mm (15.25 in)
- Installation height: 292.1 mm (11.5 in)
- Inside diameter: 115.3 mm (4.54 in)
- Outside diameter: 5.72 in
- Wire diameter: 15.1 mm (0.59 in)
Build and materials
- Spring type: Variable rate
- End types: Pigtail at both ends
- Load: 620 lbs
- Spring rate: 163 lbs per inch
- Condition: New
- Country of origin: United States
Interchange: 630.61112 · 566-896 · 277-5416 · 587-1137
45H1137 · RCS19101V · DG5871137 · 4427553 · SMS865V · 19101
This part cross-references / interchanges with the following part numbers:
Frequently Asked Questions
Is the MOOG Chassis Products CC865 a coil spring for the 1998-2011 Ford Crown Victoria?
Yes. MOOG Chassis Products CC865 is a rear coil spring set for the 1998-2011 Ford Crown Victoria, with a quantity of one per application.
Will CC865 work as one of the Lincoln Town Car coil springs for the 1994-2011 model years?
Yes. MOOG Chassis Products CC865 is a rear coil spring set that fits the 1994-2011 Lincoln Town Car.
What spring rate and height does the CC865 rear coil spring set have?
This variable-rate spring has a rate of 163 lbs per inch and a 620 lb load. Free height is 387.4 mm (15.25 in) and installation height is 292.1 mm (11.5 in).
How do I tell if a rear coil spring is sagging or worn?
Signs can include a rear end that sits lower than usual or tires wearing early from misalignment. A shop can measure ride height and inspect the springs.
Is every MOOG CC865 coil spring set load tested?
Yes. MOOG Chassis Products CC865 is 100% load tested, and it is designed to lower stresses for longer service life.
Reviews
No reviews yet — be the first to review this product.
Write a ReviewWrite a Review