Dorman - OE Solutions Suspension Control Arm and Ball Joint Assembly P/N:521-951
Dorman 521-709 front left lower control arm with ball joint for the 2008-2020 Dodge Grand Caravan and other vehicles joins the front left wheel to the body and lets it travel with the suspension. This Dorman suspension control arm and ball joint assembly is a direct replacement for the original equipment on specific vehicle applications.
A clunk over bumps, uneven tire wear or loose, wandering steering can mean a worn control arm or ball joint. Struts, sway bar links, tie rod ends and wheel bearings can be behind those signs too, so find the real cause before you order.
Vehicles it fits include the 2008-2020 Dodge Grand Caravan, the 2008-2016 Chrysler Town & Country and the 2012-2015 Ram C/V. This side takes one arm; the front right on the same axle is a separate part, and both front arms are normally replaced together. Owners of other models can look up their year and model in the "Vehicles it fits" section.
Fit and size
Build and materials
One control arm with ball joint. A grease fitting is not included.
Product information is for general reference and may contain errors. See our Disclaimer.
Will this Dorman control arm fit the 2012-2015 Ram C/V?
Yes. Dorman 521-709 is the front left lower control arm with ball joint for the 2012-2015 Ram C/V; for other models, look up your car in the "Vehicles it fits" section.
Is a grease fitting or mounting hardware included with this Dorman lower control arm?
Mounting hardware is included, but a grease fitting is not. This control arm arrives pre-greased.
Are the Dorman control arm bushings on the 521-709 rubber?
Yes. The bushings are rubber and come installed on the steel control arm, along with the ball joint.
How can I tell a Dorman suspension control arm is wearing out?
Cracked or split rubber at the bushings, a clunk over bumps or pulling to one side can all mean wear. A shop can check the ball joint for play.
What thread size does the Dorman 521-709 ball joint stud have?
The ball joint stud is threaded, with a 14 mm thread diameter. The mounting hole measures 12.3 mm across.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.