Dorman 521-112 front right upper control arm with ball joint for the 2002-2004 Isuzu Axiom and other vehicles links the front right wheel to the suspension and carries the ball joint. This Dorman suspension control arm and ball joint assembly is a direct replacement for the original assembly on specific vehicle applications.
- Dorman OE Solutions product line
- Ball joint and rubber bushings come pre-installed on the arm
- Evaluated through a testing process aimed at a smooth ride, directional stability and predictable dynamics
- Additional coatings for rust and corrosion resistance
- Steel control arm with rubber bushings
- Pre-greased, with a threaded ball joint stud
Quick facts
- Part: Dorman 521-112 control arm with ball joint
- Also called: control arm and ball joint assembly
- Fits: 2002-2004 Isuzu Axiom and other vehicles
- Position: Front right upper
- Material: Steel control arm, rubber bushings
- Condition: New
A worn arm or ball joint can show up as a clunk over bumps, loose or wandering steering, or uneven tire wear. These signs alone do not prove this arm is the problem, since a worn wheel bearing or tie rod can cause similar looseness.
Fits
This Dorman control arm is listed for a wide range of Isuzu models, such as the 2002-2004 Isuzu Axiom, the 1998-2004 Isuzu Rodeo and the 2001-2003 Isuzu Rodeo Sport. This listing is one arm for the front right; the 2002-2004 Isuzu Axiom takes one in that position, the left side is a separate part, and both sides are normally replaced together.
Specifications
Fit and size
- Position: front right upper
- Mounting hole diameter: 12.3 mm
- Ball joint thread diameter: 14 mm
- Ball joint stud length: 24 mm
- Control arm maximum length: 237 mm
- Control arm maximum width: 288.5 mm
Build and materials
- Control arm material: steel
- Bushing material: rubber
- Ball joint: installed, threaded stud
- Pre-greased: yes
- Grade: standard replacement
- Condition: new
- Country of origin: Taiwan
In the box
One control arm with ball joint and bushings installed, plus mounting hardware. A grease fitting is not included.
Interchange: 102-6017
TC6073 · CA8261 · 8973664840 · 8973664850 · 3CB60397 · 8971250052 · 8972326201 · 8972326202 · 8972326210 · RK620822 · CMS601128 · 2607624
This part cross-references / interchanges with the following part numbers:
102-6017, TC6073, CA8261, 8973664840, 8973664850, 3CB60397, 8971250052, 8972326201, 8972326202, 8972326210, RK620822, CMS601128, 2607624
Frequently Asked Questions
Does this Dorman suspension control arm fit the 1998-2004 Isuzu Rodeo?
Yes. Dorman 521-112 is listed for the 1998-2004 Isuzu Rodeo in the front right upper position. If your car is a different model, check it in the "Vehicles it fits" section.
Are the Dorman control arm bushings already installed on 521-112?
Yes. Dorman 521-112 comes with the ball joint and rubber bushings pre-installed, plus mounting hardware. A grease fitting is not included.
Is this Dorman upper control arm made of steel?
Yes. The control arm is steel with rubber bushings, and the ball joint has a threaded stud with a 14 mm thread diameter.
How do I spot a worn bushing on a front right upper control arm?
With the vehicle parked, look for cracked, split or torn rubber and heavy rust. A clunk over bumps or uneven tire wear can also point to wear, and a shop can check ball joint play.
Does Dorman 521-112 replace 102-6017?
Yes. Dorman 521-112 replaces 102-6017, and the Interchange line lists the other numbers it replaces, such as TC6073 and CA8261.
