DORMAN OE SOLUTIONS 526-438 front right lower control arm with ball joint for the 2014-2017 Infiniti QX50 and other vehicles links the wheel to the vehicle. Also sold as a control arm and ball joint assembly, this DORMAN OE SOLUTIONS control arm lets the wheel move with the suspension.
- Tested for a smooth ride, directional stability and predictable dynamics
- Ball joint installed on the arm and pre-greased, which saves time and labor
- Aluminum control arm in casting/forged construction
- Additional coatings resist rust and corrosion
Quick facts
- Part: DORMAN OE SOLUTIONS 526-438 control arm with ball joint
- Also called: control arm and ball joint assembly
- Fits: 2014-2017 Infiniti QX50 and other vehicles
- Position: Front right lower
- Material: Aluminum
- Condition: New
A clunk over bumps, a loose or wandering steering feel or uneven front tire wear can mean this arm or its ball joint is worn, though a tie rod end or a wheel bearing can be behind the same signs.
Fits
The vehicles it fits include the 2014-2017 Infiniti QX50, the 2015 Infiniti Q40 and the 2014-2015 Infiniti Q60. It is a direct replacement for the original control arm on these vehicles. This listing is one arm for the front right; the 2014-2017 Infiniti QX50 takes one on this side, the front left is a separate part ordered on its own, and the two sides are normally replaced together.
Specifications
Fit and size
- Position: front right lower
- Quantity per vehicle: 1
- Mounting holes: 4, 12.2 mm diameter
- Maximum length: 339.6 mm
- Maximum width: 526.9 mm
- Ball joint stud length: 26 mm
- Ball joint thread diameter: 16 mm
- Ball joint stud type: threaded
Build and materials
- Control arm material: aluminum
- Control arm type: casting/forged
- Bushing material: rubber
- Ball joint: installed, pre-greased
- Grade: standard replacement
- Condition: new
- Country of origin: Thailand
In the box
One control arm and one nut. A grease fitting is not included.
Product information is for general reference and may contain errors. See our Disclaimer.
Frequently Asked Questions
Does the 526-438 fit the 2014-2015 Infiniti Q60?
Yes. DORMAN OE SOLUTIONS 526-438 is a front right lower control arm with ball joint for the 2014-2015 Infiniti Q60. For any other car, look it up in the "Vehicles it fits" section.
Does the DORMAN OE SOLUTIONS suspension control arm come with a nut?
Yes. The DORMAN OE SOLUTIONS 526-438 comes with one control arm and one nut. A grease fitting is not included.
What size is the ball joint stud on this control arm?
The ball joint stud is threaded, with a 16 mm thread diameter and a 26 mm stud length.
What is this control arm made of, and is it protected against rust?
The control arm is aluminum in casting/forged construction, with rubber as the bushing material. Additional coatings resist rust and corrosion.
How big are the mounting holes on the 526-438?
The arm has 4 mounting holes, each 12.2 mm in diameter. Its maximum length is 339.6 mm and its maximum width is 526.9 mm.
