Dorman Cotter Pin P/N:784-220D
Dorman 784-222D cotter pin holds pins, drilled bolts or castle nuts in place. This Dorman cotter pin, also called a split pin or cotter key, replaces one that is damaged, missing or single-use.
A cotter pin that is bent, cracked, rusted or missing can mean it needs replacing, and a single-use pin that has been removed gets a new one. Looseness at a joint on its own does not prove the pin is at fault, since a worn bolt can look the same.
Cotter pins are universal hardware, sold by size rather than by vehicle. Match the diameter and length to the pin being replaced.
Fit and size
Build and materials
Six 1 in cotter pins and six 2 in cotter pins.
Interchange: 014347 · 014377 · 014697 · 445030 · 445040 · 14697
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
What size is the Dorman 784-222D cotter pin set?
Match the diameter and length of the pin you are replacing. This Dorman 784-222D set has 1/8 in (3.2 mm) pins in 1 in and 2 in lengths.
How many pins come in this cotter pin pack?
The pack holds six 1 in cotter pins and six 2 in cotter pins. No ring, chain or cable is attached to the pins.
Are these 1/8 in cotter pins stainless steel?
Yes. The pins are steel with a stainless steel finish, on both the 1 in and 2 in lengths.
Is a split pin the same as a cotter key?
Yes. Split pin and cotter key are other names for a cotter pin. This one is anchor style, with no ring, chain or cable attached.
Does the Dorman 784-222D replace number 445030?
Yes, 445030 is one of the numbers this Dorman 784-222D pack replaces. The other cross-reference numbers are on the Interchange line.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.