FEL-PRO ES 72229 cylinder head bolt set for the 2004-2010 Ford E-350 Super Duty 6.0L and other vehicles clamps the cylinder head to the block with a fresh set of long bolts.
- Long bolts only; replacement is recommended.
- Avoids the risk that comes with reusing T-T-Y (torque to yield) head bolts.
- Meets or exceeds all original equipment specifications.
- Application-specific design, validated for fit, form and function.
Coolant or oil seeping at the head joint, or white exhaust smoke, can mean the joint is leaking, and other faults cause the same signs. With the engine off and cool, look along the joint for wet or crusted residue before you buy bolts, and leave deeper testing to a shop.
This is a direct-fit set of head bolts for the 2004-2010 Ford E-450 Super Duty 6.0L and the 2003-2007 Ford F-250 Super Duty 6.0L, among other Ford models. The 2004-2010 Ford E-350 Super Duty 6.0L takes two sets. Open the "Vehicles it fits" section to check your exact model and engine.
Specifications
Fit and size
- Quantity per vehicle: 2
- Bolt and thread diameter: 14.0 mm
- Thread pitch: 2.00
- Thread length: 112.0 mm
- Critical length: 195.0 mm
- Head: 18mm, hex drive
Build and materials
- Type: long bolts only
- Reusable: no
- Country of origin: Taiwan
In the box
A set of long cylinder head bolts. Assembly lubricant is not included.
Interchange: 3C3Z6065AA · GS33494 · 141009301
This part cross-references / interchanges with the following part numbers:
3C3Z6065AA, GS33494, 141009301
Frequently Asked Questions
Does the FEL-PRO ES 72229 head bolt set fit the 2003-2007 Ford F-250 Super Duty 6.0L?
Yes. FEL-PRO ES 72229 fits the 2003-2007 Ford F-250 Super Duty with the V8-6.0L engine, and the 2004-2010 Ford E-350 Super Duty 6.0L as well.
What does the FEL-PRO engine cylinder head bolt set include?
FEL-PRO ES 72229 is a set of long cylinder head bolts only. Assembly lubricant is not included.
What size is the FEL-PRO cylinder head bolt in ES 72229?
Each bolt is 14.0 mm in diameter with a 2.00 thread pitch, a 112.0 mm thread length and a 195.0 mm critical length. The head is 18mm with a hex drive.
Can I reuse my old torque-to-yield head bolts instead?
No. This head bolt set is meant to avoid the risk of reusing T-T-Y (torque to yield) bolts, and its bolts are listed as not reusable.
Does ES 72229 replace number 3C3Z6065AA?
Yes. FEL-PRO ES 72229 lists 3C3Z6065AA as an interchange number, along with GS33494 and 141009301.
