Dayco 89026 accessory drive belt tensioner pulley for the 1991-1992 Ford Explorer and other vehicles rides on the serpentine belt to guide it and help keep tension on it. A worn pulley can let the belt wander or make noise, and this one replaces it.
- Steel pulley with a flat face for a serpentine belt
- Handles a belt up to 6 ribs wide
- Single bearing with a 17 mm inner diameter
- Bearing width of 12 mm
Quick facts
- Part: Dayco 89026 accessory drive belt tensioner pulley
- Fits: 1991-1992 Ford Explorer and other vehicles
- Material: Steel
- Condition: New
A worn pulley can show up as a squeal, chirp or grinding from the belt area, or as a belt that wobbles or wears unevenly. A noise alone doesn't prove the pulley is at fault, since a stretched belt makes noise too.
Fits
The 1991-1992 Ford Explorer, the 1990-1993 Ford Ranger V6 4.0L and the 1987-1989 Chevrolet Camaro V6 2.8L and 1990-1992 Camaro V6 3.1L take this Dayco accessory drive belt tensioner pulley, and so do many other vehicles; each takes one. If your vehicle isn't named here, enter it in the "Vehicles it fits" section to see whether this pulley is listed.
Specifications
Fit and size
- Quantity per vehicle: 1
- Maximum belt width: 6 ribs
- Bearing inner diameter: 17 mm
- Bearing width: 12 mm
Build and materials
- Belt type: serpentine
- Pulley face: flat
- Material: Steel
- Number of bearings: 1
- Condition: New
Interchange: 419-611
38002 · 38026 · ALT04099 · 580244 · 580251 · 49026 · A8647 · 45968 · 49002 · 5968 · 231111 · 131111 · 900024A · 900040A · YS193 · 209775 · 900024 · 900040
This part cross-references / interchanges with the following part numbers:
38002, 38026, ALT04099, 580244, 580251, 49026, 419-611, A8647, 45968, 49002, 5968, 231111, 131111, 900024A, 900040A, YS193, 209775, 900024, 900040
Frequently Asked Questions
Does the Dayco 89026 fit a 1990-1993 Ford Ranger V6 4.0L?
Yes. Dayco 89026 is listed for the 1990-1993 Ford Ranger V6 4.0L, and that engine takes one.
Is the Dayco drive belt tensioner pulley 89026 flat or grooved?
Flat. Dayco 89026 has a flat face and is made for a serpentine belt up to 6 ribs wide.
What size bearing is in this tensioner pulley?
This pulley has one bearing with a 17 mm inner diameter and a width of 12 mm.
What signs can a worn tensioner pulley show?
A squeal, chirp or grinding from the belt area, or a belt that wobbles or wears unevenly, can mean the pulley bearing is worn. A shop can confirm it with the engine off.
Does Dayco 89026 interchange with 419-611?
Yes. 419-611 is on the Interchange line for Dayco 89026, along with 38002, 38026 and the other listed numbers.
