Dayco Accessory Drive Belt Idler Pulley,Accessory Drive Belt Tensioner Pulley 89048
Dayco Accessory Drive Belt Idler Pulley,Accessory Drive Belt Tensioner Pulley 89048 - view 2
Dayco Accessory Drive Belt Idler Pulley,Accessory Drive Belt Tensioner Pulley 89048
Dayco Accessory Drive Belt Idler Pulley,Accessory Drive Belt Tensioner Pulley 89048 - view 2

Accessory Drive Belt Tensioner Pulley for 1994-1996 Ford F-250 & More - Dayco 89048

Be the first to review this product
$41.99
MPN: 89048
Item Package Quantity: 1
Adding to cart… The item has been added

Have questions?

Ask an Expert
Dayco Accessory Drive Belt Idler Pulley,Accessory Drive Belt Tensioner Pulley P/N:89048
Dayco Accessory Drive Belt Idler Pulley,Accessory Drive Belt Tensioner Pulley P/N:89048
$41.99

Dayco 89048 accessory drive belt tensioner pulley for the 1994-1996 Ford F-250 V8 7.3L and other vehicles carries the serpentine belt on its bearing as the belt drives the engine's accessories.

  • Flat pulley face that runs a serpentine belt
  • Takes a belt up to 8 ribs wide
  • Steel pulley
  • Single bearing, 17 mm inner diameter and 12 mm wide

Quick facts

  • Part: Dayco 89048 accessory drive belt tensioner pulley
  • Fits: 1994-1996 Ford F-250 V8 7.3L and other vehicles
  • Position: upper, lower, supercharger, smooth pulley
  • Material: Steel
  • Condition: New

A squeal, chirp or rattle from the belt area can point to a worn pulley bearing. With the engine off and cool, turn the pulley by hand and feel for roughness or side-to-side play, and look at the belt edges for uneven wear. A worn belt or a weak spring can make similar noises, so find the cause before you replace the pulley.

Fits

It is listed for a wide range of Ford trucks and vans, among them the 1996-1997 Ford Econoline Super Duty V8 7.3L and the 1994-1997 Ford F-350 V8 7.3L. Each V8 7.3L needs one pulley. If your truck or van is not named here, enter its year and engine on the Buyer's Guide tab to see whether it is covered.

Specifications

Fit and size

  • Position: upper, lower, supercharger, smooth pulley
  • Quantity per vehicle: 1
  • Max belt width: 8 rib
  • Bearing inner diameter: 17 mm
  • Bearing width: 12 mm

Build and materials

  • Belt type: serpentine
  • Pulley face: flat
  • Material: steel
  • Number of bearings: 1
  • Condition: New

Frequently Asked Questions

Does the Dayco 89048 tensioner pulley fit the 1996-1997 Ford Econoline Super Duty V8 7.3L?

Yes. Dayco 89048 is listed for the 1996-1997 Ford Econoline Super Duty V8 7.3L, and each engine takes one pulley.

Is this Dayco drive belt tensioner just the pulley?

Yes. This listing is the pulley itself, a steel pulley with a flat face on a single bearing.

What belt width does the 89048 pulley take?

Dayco 89048 takes a serpentine belt up to 8 ribs wide. Its single bearing has a 17 mm inner diameter and is 12 mm wide.

How can I tell if the bearing in the Dayco 89048 pulley is wearing out?

With the engine off and cool, roughness or side-to-side play when you turn the pulley by hand can mean a worn bearing. A shop can check noises that only appear with the engine running.

Which belt position is the Dayco 89048 pulley made for?

Dayco 89048 is a smooth, flat-faced pulley for the upper, lower and supercharger positions.

Related Products

!