Dayco 89134 accessory drive belt idler pulley for the 2002-2006 Nissan Altima and other vehicles guides the accessory drive belt along its path without driving an accessory itself.
- Single bearing with a 12 mm inner diameter and 12 mm width
- Steel pulley
- Flat pulley made for a serpentine belt
- Takes a belt up to 6 ribs wide
Quick facts
- Part: Dayco 89134 accessory drive belt idler pulley
- Fits: 2002-2006 Nissan Altima and other vehicles
- Position: Alternator, air conditioning, supercharger, main drive
- Material: Steel
- Condition: New
A squeal or chirp from the belt area, a pulley that wobbles, or a rough, grinding bearing can mean this pulley is worn. A weak belt tensioner or a glazed belt can produce similar noise, so find the cause before you replace anything.
Fits
This idler pulley is listed for the 2002-2006 Nissan Altima V6-3.5L, the 1995-2008 Nissan Maxima and the 2003-2007 Nissan Murano, along with a wide range of other models. If your car is not named here, open the "Vehicles it fits" section and look up your exact model and engine.
Specifications
Fit and size
- Position: Alternator, air conditioning, supercharger, main drive
- Quantity per vehicle: 1
- Bearing inner diameter: 12 mm
- Bearing width: 12 mm
- Maximum belt width: 6 ribs
Build and materials
- Material: Steel
- Belt type: Serpentine
- Flat pulley: Yes
- Number of bearings: 1
- Condition: New
In the box
One accessory drive belt idler pulley. This listing holds one pulley, and each vehicle takes one.
Interchange: 419-624 · 419-625
36087 · ALT06005 · 580169 · 49108 · 45004 · 45062 · 900175A · 900175
This part cross-references / interchanges with the following part numbers:
36087, ALT06005, 580169, 49108, 419-624, 419-625, 45004, 45062, 900175A, 900175
Frequently Asked Questions
Does the Dayco 89134 idler pulley fit the 1995-2008 Nissan Maxima?
Yes. Dayco 89134 is listed for the 1995-2008 Nissan Maxima, and the vehicle takes one pulley.
What belt width fits the Dayco accessory drive belt idler pulley?
Dayco 89134 is listed for belts up to 6 ribs wide, and it is a flat pulley made for a serpentine belt.
What bearing does Dayco 89134 use?
Dayco 89134 has a single bearing with a 12 mm inner diameter and a 12 mm width.
What does a worn accessory drive idler pulley sound like?
A chirp or grinding noise from the belt area can mean the bearing is wearing. With the engine off and cool, a pulley that feels rough or shows play when turned by hand can also mean wear.
Is 36087 a cross-reference for this idler pulley?
Yes. 36087 is one of the interchange numbers listed for this pulley, alongside 419-624, 419-625 and 900175A.
