Dayco 89154 accessory drive belt idler pulley for the 2000-2009 Toyota Tundra V8 4.7L and other vehicles routes the drive belt along its path on the engine's main drive.
- Grooved pulley for the main drive position
- Single bearing with a 12 mm inner diameter
- Bearing width of 14 mm
- Maximum belt width of 6 ribs
Quick facts
- Part: Dayco 89154 accessory drive belt idler pulley
- Fits: 2000-2009 Toyota Tundra V8 4.7L and other vehicles
- Position: Main drive, grooved pulley
- Condition: New
A squeal, chirp or grinding from the belt area, or a pulley that feels rough or loose when turned by hand with the engine off and cool, can mean the idler pulley bearing is worn. A worn belt, a weak tensioner or a misaligned pulley can be behind the same signs, so find the cause before buying.
Fits
The 2000-2009 Toyota Tundra V8 4.7L, the 2003-2009 Toyota 4Runner V8 4.7L and the 2009 Toyota Sienna take this pulley, and so do other Toyota and Lexus models. Open the Buyer's Guide tab to check your exact model and engine.
Specifications
Fit and size
- Position: Main drive, grooved pulley
- Quantity per vehicle: 1
- Maximum belt width: 6 ribs
- Bearing inner diameter: 12 mm
- Bearing width: 14 mm
Build and materials
- Number of bearings: 1
- Condition: New
In the box
One accessory drive belt idler pulley. This listing holds a single pulley, and each vehicle takes one.
Interchange: 419-684
36026 · 49086 · 45021 · 900678A · 900678
This part cross-references / interchanges with the following part numbers:
36026, 49086, 419-684, 45021, 900678A, 900678, 16604-0F010, 16604-50010, 16604-50030
