Dayco Accessory Drive Belt Idler Pulley P/N:89164
Dayco 89581 accessory drive belt idler pulley for the 2007-2013 Mitsubishi Outlander guides the serpentine belt at the power steering position. This Dayco accessory drive belt idler pulley turns on a single bearing and does not drive an accessory.
A worn idler pulley can show up as a squeal, chirp or rumble near the belt, or as uneven belt wear. Before you replace the pulley, rule out a worn belt, a tensioner problem or a misaligned belt as the source of the noise. The 2007-2013 Mitsubishi Outlander takes one pulley.
This pulley fits the 2007 Mitsubishi Outlander and the 2008-2013 Outlander V6-3.0L.
Fit and size
Build and materials
This part cross-references / interchanges with the following part numbers:
Does the Dayco 89581 idler pulley fit the 2007-2013 Mitsubishi Outlander V6-3.0L?
Yes. Dayco 89581 fits the 2007 Mitsubishi Outlander and the 2008-2013 Outlander V6-3.0L, with one pulley per vehicle.
What size bearing does the Dayco 89581 idler pulley have?
Dayco 89581 has one bearing with a 17 mm inner diameter and a 14 mm width.
How wide a belt does this power steering idler pulley take?
This pulley takes a serpentine belt up to 4 ribs wide and has a flat pulley surface.
What noises can a worn accessory drive belt idler pulley make?
A worn pulley bearing can make a squeal, chirp or rumble near the belt, and the belt may show uneven wear.
What material is this accessory drive belt idler pulley made of?
This pulley is made of polymer and runs on a single bearing.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.