Dayco 15410 accessory drive belt for the 1977-1979 Ford F-150 V8 6.6L, the 1977-1981 F-150 V8 5.8L, the 1977-1983 F-150 6-cylinder 4.9L and other vehicles carries power from the crankshaft pulley to the engine's accessories.
- Bottom cog belt construction
- Synthetic rubber compound
- 36-degree belt angle
- Built to SAE J636 and SAE J637 standards
- Operating range from -35 F to 175 F (-37.2 C to 79.4 C)
Quick facts
- Part: Dayco 15410 accessory drive belt
- Fits: the 1977-1979 Ford F-150 V8 6.6L, the 1977-1981 F-150 V8 5.8L, the 1977-1983 F-150 6-cylinder 4.9L and other vehicles
- Material: synthetic rubber compound
- Condition: New
Cracks in the cogged underside, fraying, a glazed surface or a squeal at start-up can mean the belt is worn, and you can look it over for cracks and fraying with the engine off and cool. A squeal alone does not prove the belt is the problem, since a worn pulley bearing can make a similar noise.
Fits
The belt is listed for a wide range of Ford, Chevrolet and Plymouth models, including the 1977-1981 Ford F-250 V8 5.8L, the 1977-1982 F-250 V8 6.6L and the 1977-1984 F-250 6-cylinder 4.9L, plus the 1968-1970 Ford Mustang 6-cylinder 3.3L and the 1969 Mustang V8 5.0L or 7.0L. Some applications take one belt and others take two. If your vehicle isn't named here, look up its year and engine in the "Vehicles it fits" section.
Specifications
Fit and size
- Quantity per vehicle: varies by application
- Belt angle: 36 degrees
Build and materials
- Construction: bottom cog
- Material: synthetic rubber compound
- Banded belt: no
- Standards: SAE J636, SAE J637
- Operating temperature: -35 F to 175 F (-37.2 C to 79.4 C)
- Condition: New
Product information is for general reference and may contain errors. See our Disclaimer.
Frequently Asked Questions
Does the Dayco 15410 belt fit the 1977-1981 Ford F-250 with the V8 5.8L?
Yes. Dayco 15410 is listed for the 1977-1981 Ford F-250 V8 5.8L. For another year or engine, look it up in the "Vehicles it fits" section.
Is this accessory drive belt right for the 1969 Ford Mustang V8 7.0L?
Yes. Dayco 15410 is listed for the 1969 Ford Mustang V8 7.0L, and that engine takes two belts. The 1969 Mustang V8 5.0L is listed too and takes one.
What is the Dayco 15410 drive belt made of?
The belt uses a synthetic rubber compound and has a bottom cog construction. It is a single belt, not a banded set.
What temperature range does this bottom cog belt operate in?
The belt operates from -35 F to 175 F (-37.2 C to 79.4 C).
How do I tell if a cogged drive belt is worn out?
With the engine off and cool, look for cracks in the cogs, fraying or a glossy glazed surface. A squeal at start-up is another sign; a shop can inspect the belt if you're unsure.
