Add to Cart
The item has been added
Dayco Accessory Drive Belt P/N:24490
$28.99
Keep the engine accessories turning with the Dayco Accessory Drive Belt / V-Belt (MPN 24490), a direct-fit replacement for a long list of vintage applications including the 1946-1949 Buick Special Series 40 [L8-4.1L], 1942 Buick Super Series 50 [L8-4.1L], 1938 Cadillac Series 60 [V8-5.7L], 1949-1950 Chrysler Imperial [L8-5.3L], 1943-1945 DeSoto Custom [L6-3.9L] and 1950 Chrysler Windsor [L6-4.1L]. It rides in the pulley groove and transmits crankshaft rotation to the belt-driven accessories. This part is cataloged under both names. With 87 total applications, see the Buyer's Guide tab for the complete list.
Features:
- V-belt construction: Double Cog build with a 38° angle and 0.75 in top width; not a banded belt.
- Material: Synthetic Rubber Compound in black.
- Size: 49 in effective length (1244.60 mm) and 49.64 in outside circumference (1260.86 mm).
- Rated range: built to SAE J636 and SAE J637, with an operating range from -35°F to 175°F (-37.2°C to 79.4°C).
If a cracked, glazed, or worn belt is behind slipping or squeal, this V-belt replaces it. Manufacturer part number 24490. Country of origin: Indonesia.
This part cross-references / interchanges with the following part numbers:
T24489, 628, 23498, TR24489, 17A1240, 409, 44, 660, 660T, 24493, 24490, 25-12400, 25-12430, 25-24489, 202, 24495, 2L1477, 2M4049, 8F2434, 964278, 178495, 3040380, 5177306, D1102-5443, 9044488, C7TS-8620-F, GL5144, GT24493, 2194243, 332338-R1
Frequently Asked Questions
What is the Dayco 24490?
It is an accessory drive belt, also known as a V-belt, that seats in the pulley groove and transmits crankshaft rotation to the engine's belt-driven accessories.
Will this belt fit my vehicle?
It is a direct-fit replacement for 87 listed applications, including 1946-1949 Buick Special Series 40 [L8-4.1L] and 1938 Cadillac Series 60 [V8-5.7L]. Check the Buyer's Guide tab to confirm your vehicle.
What is the belt made of and what size is it?
It uses a Synthetic Rubber Compound in black with a Double Cog construction, 38° angle, and 0.75 in top width. Effective length is 49 in (1244.60 mm).
What standards does it meet?
The belt is built to SAE J636 and SAE J637, with a rated operating range from -35°F to 175°F (-37.2°C to 79.4°C).
What are signs this belt may need replacing?
Cracking, glazing, fraying, or squeal can be signs a V-belt is worn. If a failing belt is the cause, this part replaces it; diagnose the issue before ordering.
Write a Review
Dayco
Dayco Accessory Drive Belt P/N:24490
Related Products
Add to Cart
The item has been added
Add to Cart
The item has been added