Dayco 89005 accessory drive belt tensioner pulley for the 1994-2002 Dodge Ram 2500 6-cylinder 5.9L and other vehicles rides on the serpentine belt and helps the tensioner hold it snug.
- Two bearings, each with a 17 mm inner diameter
- Bearing width of 24 mm
- Flat pulley face for a serpentine belt
- Maximum belt width of 8 ribs
Quick facts
- Part: Dayco 89005 accessory drive belt tensioner pulley
- Fits: 1994-2002 Dodge Ram 2500 6-cylinder 5.9L and other vehicles
A squeal or chirp from the belt area, a wobbling pulley or uneven belt wear can mean the pulley bearings are wearing out. Those signs alone don't prove this pulley is the problem, since a worn belt can make the same noise.
Fits
The 1994-2002 Dodge Ram 3500 6-cylinder 5.9L, the 1989-1993 Dodge D250 6-cylinder 5.9L and the 1989 D250 V8 5.9L also fit this pulley, along with more Dodge models. Don't see your vehicle named? Look up its year and engine in the "Vehicles it fits" section.
Specifications
Fit and size
- Quantity per vehicle: 1
- Bearing inner diameter: 17 mm (both bearings)
- Bearing width: 24 mm
- Maximum belt width: 8 rib
Build and materials
- Belt type: serpentine
- Pulley face: flat
- Number of bearings: 2
In the box
One accessory drive belt tensioner pulley. This listing holds one pulley, and the vehicle takes one.
Interchange: 419--647
38006 · 49101 · A5497 · 38023 · 5981 · 231105 · 131105 · 900005A · 900022A · 209765
This part cross-references / interchanges with the following part numbers:
38006, NA, 49101, 419--647, A5497, 38023, 5981, 231105, 131105, 900005A, 900022A, 209765, 3935819, E9SE-6B209-JA, E9SZ-6B209-A, F4SZ-6B209-A, 8100699500, 8971064550, 8-10069-950-0, 8-97106-455-0
Frequently Asked Questions
Does the Dayco 89005 pulley fit the 1994-2002 Dodge Ram 2500 6-cylinder 5.9L?
Yes. Dayco 89005 is listed for the 1994-2002 Dodge Ram 2500 6-cylinder 5.9L and for the 1994-2002 Dodge Ram 3500 6-cylinder 5.9L.
How many bearings does this tensioner pulley have?
This pulley has two bearings, each with a 17 mm inner diameter. The bearing width is 24 mm.
Is the Dayco drive belt tensioner 89005 made for a serpentine belt?
Yes. This Dayco tensioner pulley has a flat face for a serpentine belt, and its maximum belt width is 8 ribs.
Is Dayco 89005 sold as a single pulley or a set?
Dayco 89005 is a single tensioner pulley. The application list shows a quantity of one per vehicle.
Does 38006 interchange with this tensioner pulley?
Yes. 38006 is on the interchange list for Dayco 89005, along with 38023, 49101 and others printed at the bottom of the page.
