PowerBond by Dayco PB1188N harmonic balancer for the 1994-1997 Honda Accord and other vehicles damps crankshaft vibration and carries two serpentine belt pulleys. Some catalogs list it as an engine harmonic balancer.
- Two integrated serpentine pulleys: 4 grooves at 103.000 mm and 6 grooves at 172.800 mm outside diameter
- Grey iron outer ring
- Timing marks on the balancer
- Neutral balance with no counterweight
Quick facts
- Part: PowerBond by Dayco PB1188N harmonic balancer
- Also called: engine harmonic balancer
- Fits: 1994-1997 Honda Accord and other vehicles
- Material: Grey iron outer ring
- Condition: New
A worn balancer can show up as a cracked ring, a visible wobble or a damaged pulley groove. A worn serpentine belt, a weak tensioner or a tired accessory bearing can be behind belt noise or vibration too, so find the cause before buying a new balancer.
Fits
The 1994-1997 Honda Accord, the 1995-1997 Honda Odyssey and the 1997 Acura CL 4-cylinder 2.2L are covered by this direct-fit balancer, along with more vehicles. Each engine takes one, on the crankshaft. Open the "Vehicles it fits" section to check your exact model and engine.
Specifications
Fit and size
- Quantity per vehicle: 1
- Overall outside diameter: 180.00 mm (7.087 in)
- Crank bore: 30.00 mm (1.182 in)
- Overall width: 64.80 mm (2.552 in)
- Ring width: 24.79 mm (0.976 in)
- Pulley 1 outside diameter: 103.000 mm (4.056 in), 4 grooves
- Pulley 2 outside diameter: 172.800 mm (6.804 in), 6 grooves
Build and materials
- Type: harmonic balancer with 2 integrated serpentine pulleys
- Outer ring material: grey iron
- Timing marks: yes
- Counterweight balance: neutral, no counterweight
- Condition: new
- Country of origin: China
In the box
One harmonic balancer and installation instructions. Mounting hardware and a Woodruff key are not included, so plan on new fasteners, as the old ones may not be reusable.
Installation notes
- Installation instructions come with the part.
Interchange: 594-067 · DA-220
102095 · 6005248
This part cross-references / interchanges with the following part numbers:
102095, 594-067, 6005248, DA-220
Frequently Asked Questions
Is the Honda Accord harmonic balancer PB1188N right for a 1995-1997 car with the L4-2.2L engine?
Yes. PowerBond by Dayco PB1188N fits the 1995-1997 Honda Accord with the L4-2.2L engine. The 1994 Honda Accord is also listed.
Does the PowerBond PB1188N come with a bolt or Woodruff key?
No. PowerBond by Dayco PB1188N ships with installation instructions, but hardware and a Woodruff key are not included. Plan on new fasteners, since old ones may not be reusable.
What size is the crank bore on this harmonic balancer?
The crank bore is 30.00 mm (1.182 in). The overall outside diameter is 180.00 mm (7.087 in) and the overall width is 64.80 mm (2.552 in).
How can I check a harmonic balancer for wear?
With the engine off and cool, look for cracks, a damaged pulley groove or a visible wobble of the ring. Noise or vibration can have other causes, so a shop can test the engine while it runs.
How many belt grooves do the two pulleys on the PB1188N have?
The first serpentine pulley has 4 grooves at 103.000 mm outside diameter. The second has 6 grooves at 172.800 mm.
