Route hot coolant to the heater core reliably with the Dayco heater hose 86125, a molded HVAC heater hose that drops in as a direct-fit replacement on the 1995-2000 Chrysler Cirrus (V6-2.5L), 1996-2000 Chrysler Sebring (V6-2.5L), and 1995-2000 Dodge Stratus (V6-2.5L). This is the heater inlet hose, carrying engine coolant on its way to the heater core so the cabin heat and defrost circuit stays fed.
Cracked, swollen, or leaking coolant hoses are signs this Dayco HVAC heater hose may need replacing. If a failed heater inlet hose is the cause of your coolant loss or weak cabin heat, this molded hose replaces it. Always inspect the cooling system and clamps when servicing.
Interchange: 18236L · 19090 · 11090
This part cross-references / interchanges with the following part numbers:
What vehicles does the Dayco 86125 heater hose fit?
It is a direct-fit replacement for the 1995-2000 Chrysler Cirrus (V6-2.5L), 1996-2000 Chrysler Sebring (V6-2.5L), and 1995-2000 Dodge Stratus (V6-2.5L). See the Buyer's Guide tab to confirm your vehicle.
Where does this hose install?
It is the heater inlet hose, routing engine coolant toward the heater core so the cabin heat and defrost circuit stays supplied.
What is the inside diameter and length of this Dayco HVAC heater hose?
Both ends have a 0.59 in inside diameter, and the hose measures 12 in along the centerline.
Is this a molded hose?
Yes. It is a molded heater hose, pre-formed to follow the intended routing so it clears surrounding components without kinking.
What are the signs this heater hose needs replacing?
Cracking, swelling, softness, or coolant leaks at the hose. If a failed heater inlet hose is the cause of coolant loss or weak cabin heat, this replaces it.
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
