Dayco 70445 radiator coolant hose for the 1965 Ford Mustang V8 4.3L, the 1965-1968 Mustang V8 4.7L, the 1968-1969 Mustang V8 5.0L, the 1969 Mustang V8 5.8L and other vehicles carries coolant between the engine and the radiator.
- EPDM hose material
- Built to SAE J20R4 Class D-1 and SAE J1684 Type EC
- Single I.D. hose type
- Trunk height of 14 1/2 in
Quick facts
- Part: Dayco 70445 radiator coolant hose
- Fits: the 1965 Ford Mustang V8 4.3L, the 1965-1968 Mustang V8 4.7L, the 1968-1969 Mustang V8 5.0L, the 1969 Mustang V8 5.8L and other vehicles
- Position: Upper, lower
- Material: EPDM
- Condition: New
A cracked, swollen or soft hose, coolant stains at its ends, or a temperature gauge that climbs can all mean a hose is wearing out. Before you order, look the hose over and squeeze it with the engine off and fully cool. A leak at a clamp, the radiator or the water pump can look much the same.
Fits
The 1995-1996 Ford E-150 Econoline 6-cylinder 4.9L and the 1995-1996 Ford E-150 Econoline Club Wagon 6-cylinder 4.9L both fit this hose, as do many other vehicles, with one hose per vehicle. Open the "Vehicles it fits" section to check your exact model and engine.
Specifications
Fit and size
- Position: upper, lower
- Quantity per vehicle: 1
- Trunk height: 14 1/2 in
Build and materials
- Hose type: single I.D. hose
- Material: EPDM
- SAE specification: SAE J20R4 Class D-1, SAE J1684 Type EC
- Condition: new
In the box
One radiator coolant hose. No protective sleeve or heat shield is included.
Interchange: 22004M · 22026M · 22042M · MH227 · 20225 · 20509 · 20516 · 60371 · 091 · 60191 · KM2004 · KM2078 · KM2935 · KM311 · 7184 · 7304 · 7305 · H293 · MR545 · MR729 · CH238
This part cross-references / interchanges with the following part numbers:
22004M, 22026M, 22042M, MH227, 20225, 20509, 20516, 60371, 091, 60191, KM2004, KM2078, KM2935, KM311, 7184, 7304, 7305, H293, MR545, MR729, CH238
Frequently Asked Questions
Does the Dayco 70445 hose fit the 1995-1996 Ford E-150 Econoline 6-cylinder 4.9L?
Yes. Dayco 70445 is listed for the 1995-1996 Ford E-150 Econoline 6-cylinder 4.9L, and that engine takes one hose.
Does this radiator coolant hose come with a protective sleeve or heat shield?
No. This listing is one radiator coolant hose, and neither a protective sleeve nor a heat shield is included.
What SAE specifications does the Dayco radiator coolant hose meet?
Dayco 70445 is listed to SAE J20R4 Class D-1 and SAE J1684 Type EC.
Is this Dayco coolant hose made of EPDM?
Yes. Dayco 70445 is an EPDM single I.D. hose with a trunk height of 14 1/2 in.
Can I keep driving with a leaking radiator coolant hose?
No. A leaking hose lets the engine lose coolant, so have it checked or replaced promptly rather than driving on it.
