Dayco 71695 radiator coolant hose for the 1995-2004 Toyota Tacoma V6 3.4L and other vehicles carries coolant to and from the radiator. It is a single I.D. hose made of EPDM.
- EPDM hose material
- Single I.D. hose type
- Built to SAE J20R4 Class D-1 and SAE J1684 Type EC
Quick facts
- Part: Dayco 71695 radiator coolant hose
- Fits: 1995-2004 Toyota Tacoma V6 3.4L and other vehicles
- Position: Upper, lower
- Material: EPDM
- Condition: New
A hose that is cracked, swollen or weeping coolant at the ends can mean it needs replacing. A leaking radiator, a loose clamp, a weak water pump or a sticking thermostat can cause coolant loss and overheating too, so find the cause before you buy. Inspect hoses only when the engine is cool.
Fits
This hose is listed for a wide range of Toyota, Mitsubishi, Chrysler and Dodge models, among them the 1996-2002 Toyota 4Runner and the 1995-1999 Mitsubishi Eclipse 4-cylinder 2.0L and the 2000-2005 Eclipse 4-cylinder 2.4L or V6 3.0L. Plan on one hose per vehicle. If your car is not named here, open the Buyer's Guide tab and check your exact model and engine.
Specifications
Fit and size
- Position: upper, lower
- Quantity per vehicle: 1
- Trunk height: 14 in
Build and materials
- Hose type: single I.D. hose
- Material: EPDM
- SAE specification: SAE J20R4 Class D-1, SAE J1684 Type EC
- Condition: new
In the box
One radiator coolant hose. A protective sleeve and a heat shield are not included.
Interchange: 22497M · 22507M · 22868 · 22906 · 66032 · 62510 · 9503 · 9541
This part cross-references / interchanges with the following part numbers:
22497M, 22507M, 22868, 22906, 66032, 62510, 9503, 9541, 05278950AB, 4495830, 4546651, 5278950AA, 5278950AB, 5278950AC, 5278950AD, 5278950AE, 5278950AF, MB906428, 22579684, 22595508, 22643510, 22653652, MR312255, MR355520, MR355521, MR355522, MR968439, 16571-07030, 16571-62070
Frequently Asked Questions
Is this Dayco coolant hose the right one for the 1995-2004 Toyota Tacoma V6 3.4L?
Yes. Dayco 71695 is listed for the 1995-2004 Toyota Tacoma V6 3.4L. For other models and engines, open the Buyer's Guide tab.
What is this Dayco radiator coolant hose made of?
Dayco 71695 is made of EPDM and built to SAE J20R4 Class D-1 and SAE J1684 Type EC.
Does this radiator coolant hose come with a protective sleeve or heat shield?
No. This listing is one radiator coolant hose, and neither a protective sleeve nor a heat shield is included.
What signs show an EPDM radiator coolant hose is wearing out?
Look at the hose with the engine off and cool for cracks, swelling or coolant seepage at the ends. A shop can pressure-test the system for leaks you cannot see.
What size is the Dayco 71695 hose?
Dayco 71695 has a trunk height of 14 in and is a single I.D. hose. Its position is listed as upper, lower.
