Dayco Radiator Coolant Hose P/N:72248

Be the first to review this product
$27.99
MPN: 72248
Item Package Quantity: 1
Adding to cart… The item has been added

Have questions?

Dayco Radiator Coolant Hose P/N:72248
Dayco Radiator Coolant Hose P/N:72248
$27.99

Keep coolant circulating between the engine and radiator with the Dayco Radiator Coolant Hose 72248, a curved hose that installs as a direct-fit replacement on the 2004-2008 Ford F-150 (V8-4.6L, V8-5.4L) and the 2006-2008 Lincoln Mark LT (V8-5.4L). It carries hot coolant along its curved route so the cooling system can shed heat under normal operation.

  • Material: EPDM, black.
  • SAE specification: SAE J20R4 Class D-1, SAE J1684 Type EC.
  • Design: curved, single I.D. hose measuring 1.75 in (1 3/4 in) inside diameter at both End 1 and End 2.
  • Length: 27.5 in centerline.
  • Does not include a heat shield or a protective sleeve.

A radiator hose lives between the engine and radiator and moves coolant through the system. Over time EPDM rubber can harden, crack, swell, or split at the ends, and swelling, soft spots, seepage, or a low-coolant/overheating condition are signs this hose may need replacing. If a failed hose is the cause of your coolant leak, this replaces it; diagnose the source of any leak before ordering. Country of origin: Thailand.

Interchange: Manufacturer part number 72248.

This part cross-references / interchanges with the following part numbers:

26474X, 22863, 62903, KM4739, KM-4739, KM4917, 9498, 4L34-8B274-DC, 4L3Z-8260-DA, 4L3Z 8260-DA, 7L34-8B274-AA, 7L3Z-8260-A, 7L3Z 8260-A

Frequently Asked Questions

What vehicles does the Dayco 72248 fit?

It is a direct-fit replacement for the 2004-2008 Ford F-150 (V8-4.6L and V8-5.4L) and the 2006-2008 Lincoln Mark LT (V8-5.4L). See the Buyer's Guide tab to confirm your vehicle.

What is this radiator hose made of?

It is molded from black EPDM rubber and meets SAE J20R4 Class D-1 and SAE J1684 Type EC specifications.

What are the inside diameter and length?

It is a curved single I.D. hose with a 1.75 in (1 3/4 in) inside diameter at both ends and a centerline length of 27.5 in.

What are signs this hose may need replacing?

Hardened, cracked, swollen, or split rubber, soft spots, coolant seepage, or a low-coolant/overheating condition can indicate the hose should be replaced. Diagnose the leak source first.

Does it include a heat shield or protective sleeve?

No. This hose does not include a heat shield or a protective sleeve.