Dayco Radiator Coolant Hose P/N:71977
Dayco 72828 lower radiator coolant hose for the 2011-2012 Dodge Avenger 4-cylinder 2.4L and other vehicles carries coolant between the radiator and the engine. Coolant leaves the radiator through the lower hose on its way back to the engine.
Coolant drips, a soft or swollen hose, or an engine that runs hot can mean this hose is worn, but a sticking thermostat or a leaking radiator cap may be behind them too, so trace the source before you buy. Look at the hose only with the engine off and cool.
This hose fits the 2011-2012 Dodge Avenger 4-cylinder 2.4L and the 2011-2012 Chrysler 200 4-cylinder 2.4L.
Fit and size
Build and materials
One lower radiator coolant hose with a protective sleeve. A heat shield is not included. The vehicle takes one hose.
This part cross-references / interchanges with the following part numbers:
Is this Dayco coolant hose right for the 2011-2012 Chrysler 200 4-cylinder 2.4L?
Yes. Dayco 72828 is a lower radiator coolant hose that fits the 2011-2012 Chrysler 200 4-cylinder 2.4L.
Which SAE specifications does the Dayco radiator coolant hose meet?
Dayco 72828 is listed to SAE J20R4 Class D-1 and SAE J1684 Type EC.
Does this lower radiator coolant hose come with a protective sleeve or a heat shield?
This hose contains a protective sleeve. A heat shield is not included.
What size are the ends on this lower radiator coolant hose?
Both ends measure 1 25/32 in in outside diameter, and the hose is a single I.D. design.
How do I spot a worn lower radiator coolant hose?
With the engine off and cool, look for cracks, a swollen or soft hose, or coolant residue at the ends. A shop can pressure-test the cooling system.
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.