Dayco 73049 lower radiator coolant hose for the 2011-2016 Ford F-450 Super Duty V10 6.8L and other vehicles carries coolant between the radiator and the engine.
- Single I.D. hose with a 1 25/32 in outside diameter at both ends
- EPDM hose material
- SAE specification J20R4 Class D-1 and SAE J1684 Type EC
- Trunk height of 21 1/2 in
Quick facts
- Part: Dayco 73049 radiator coolant hose
- Fits: 2011-2016 Ford F-450 Super Duty V10 6.8L and other vehicles
- Position: Lower
- Material: EPDM
- Condition: New
A hose that is cracked, bulging, soft or weeping at the ends, or an engine that runs hot, can mean the hose is failing. A leaking radiator, a loose clamp, a weak water pump or a stuck thermostat can be behind those signs too, so track down the source before you buy a hose. Look the hose over only with the engine off and cool.
Fits
This Dayco coolant hose is listed for a wide range of Ford models, including the 2011-2016 Ford F-550 Super Duty V10 6.8L and the 2011-2016 Ford F-250 Super Duty V8 6.2L. If your vehicle is not named here, look it up in the "Vehicles it fits" section.
Specifications
Fit and size
- Position: Lower (pipe to radiator, connector to radiator)
- Quantity per vehicle: 1
- End 1 outside diameter: 1 25/32 in (1.78 in)
- End 2 outside diameter: 1 25/32 in (1.78 in)
- Trunk height: 21 1/2 in (21.5 in)
Build and materials
- Hose type: Single I.D. hose
- Material: EPDM
- SAE specification: J20R4 Class D-1, J1684 Type EC
- Condition: New
In the box
One lower radiator coolant hose. This listing holds one hose, and a vehicle needs one. No protective sleeve or heat shield is included.
Interchange: 27197X · 66447 · 24412 · KM5036 · KM5108 · 17078
This part cross-references / interchanges with the following part numbers:
27197X, 66447, 24412, KM5036, KM5108, 17078, BC3Z-8286-A, BC3Z-8286-J
Frequently Asked Questions
Is Dayco 73049 the right lower hose for the 2011-2016 Ford F-250 Super Duty V8 6.2L?
Yes. Dayco 73049 is listed as a lower radiator coolant hose for the 2011-2016 Ford F-250 Super Duty V8 6.2L. Other vehicles are in the "Vehicles it fits" section.
Does the Dayco 73049 hose come with a protective sleeve or heat shield?
No. This Dayco 73049 listing is one hose, and it does not include a protective sleeve or a heat shield.
Is this Dayco radiator coolant hose made of EPDM?
Yes. The hose is EPDM, a single I.D. hose with SAE specification J20R4 Class D-1 and SAE J1684 Type EC.
How can I tell this lower hose is wearing out?
Cracks, bulges, soft spots or coolant seepage at the ends can mean the hose is failing. Look only with the engine off and cool.
Does Dayco 73049 replace KM5036?
Yes. KM5036 is on the interchange list for Dayco 73049.
