Delphi SS20890 front right ABS wheel speed sensor for the 2013-2014 Ford Fusion 4-cylinder 1.6L, the 2013-2020 Fusion 4-cylinder 2.0L or 2.5L, the 2014-2020 Fusion 4-cylinder 1.5L, the 2017-2019 Fusion V6 2.7L and other vehicles reads how fast the wheel turns and passes that signal to the ABS control unit. This Delphi ABS wheel speed sensor is built to meet or exceed OE requirements and testing.
- Sensors tested and calibrated for accurate readings
- Plated connectors help prevent corrosion and failure commonly caused by internal and cable short circuits
- Design helps prevent mechanical damage to the sensor wheel, soiling and increased wheel bearing free play
- Sensor maintains performance during drastic temperature changes
- Digital output designed for maximum signal to noise ratio
Quick facts
- Part: Delphi SS20890 ABS wheel speed sensor
- Fits: 2013-2014 Ford Fusion 4-cylinder 1.6L, the 2013-2020 Fusion 4-cylinder 2.0L or 2.5L, the 2014-2020 Fusion 4-cylinder 1.5L, the 2017-2019 Fusion V6 2.7L and other vehicles
- Position: Front right
- Condition: New
A lit ABS or traction control warning light can mean a wheel speed sensor has failed, though other parts can bring it on too. Before you replace anything, look over the visible wiring and connector with the engine off for cracks, chafing or corrosion. A shop can test the signal itself.
Fits
The same sensor also fits the 2013-2016 Lincoln MKZ V6 3.7L, the 2013-2020 MKZ 4-cylinder 2.0L, the 2017-2020 MKZ V6 3.0L and the 2019-2020 Ford Police Responder Hybrid 4-cylinder 2.0L, and each takes one at the front right. This listing is one sensor; the front left is a separate part ordered separately. If your car isn't named here, open the "Vehicles it fits" section and look up your exact model and engine.
Specifications
Fit and size
- Position: Front right
- Quantity per vehicle: 1
Build and materials
- Output: digital
- Connectors: plated
- Condition: New
In the box
One ABS wheel speed sensor and one instruction sheet.
Interchange: DG9Z 2C204-A · DG9Z 2C204-B · JG9Z 2C204-A
ABS2596 · 532967 · ALS2596 · 5S13992
This part cross-references / interchanges with the following part numbers:
ABS2596, DG9Z 2C204-A, DG9Z 2C204-B, JG9Z 2C204-A, 532967, ALS2596, 5S13992
Frequently Asked Questions
Is this the wheel speed sensor for the 2017-2019 Ford Fusion V6 2.7L?
Yes. Delphi SS20890 is a front right sensor and fits the 2017-2019 Ford Fusion V6 2.7L. For another car, check your model and engine in the "Vehicles it fits" section.
Does the Delphi SS20890 come with an instruction sheet?
Yes. The Delphi SS20890 package holds one ABS wheel speed sensor and an instruction sheet.
Is this ABS wheel speed sensor for the left or right side?
This sensor is for the front right wheel. The front left is a separate part, ordered on its own.
Are the connectors on this ABS wheel speed sensor plated?
Yes. The plating on the connectors is there to help prevent corrosion and the failures that internal and cable short circuits commonly cause.
What does a failing front right ABS wheel speed sensor look like?
The sign most drivers notice is an ABS or traction control warning light, which can come from this sensor or another part. A shop can read the codes and test the signal.
