Delphi SS21646 front left ABS wheel speed sensor for the 2016-2020 Toyota Mirai and other vehicles senses wheel speed for the ABS. It is built to meet or exceed OE requirements and testing.
- Sensor tested and calibrated for accurate readings
- Plated connectors help prevent corrosion and failures caused by internal and cable short circuits
- Sensor design helps prevent mechanical damage to the sensor wheel, soiling and increased wheel bearing free play
- Sensor maintains performance during drastic temperature changes
- Digital output designed for maximum signal to noise ratio
Quick facts
- Part: Delphi SS21646 ABS wheel speed sensor
- Fits: 2016-2020 Toyota Mirai and other vehicles
- Position: Front left
- Condition: New
An ABS or traction control warning light can mean a wheel speed sensor has failed, though wiring or the sensor wheel may also be behind it. With the engine off, look the connector and wire over for damage, corrosion or dirt first; a shop can read the codes.
Fits
The 2016-2020 Toyota Mirai, the 2012-2018 Toyota Prius v 4-cylinder 1.8L, the 2017-2018 Toyota Corolla iM 4-cylinder 1.8L and other vehicles take this sensor. If your car is not named here, open the "Vehicles it fits" section and look up your exact model and engine. This listing is one sensor for the front left wheel; the 2016-2020 Toyota Mirai takes one at that position, and the front right is a separate part.
Specifications
Fit and size
- Position: Front left
- Quantity per vehicle: 1
Build and materials
- Condition: New
- Output: Digital
- Connectors: Plated
In the box
One ABS wheel speed sensor and one instruction sheet.
Interchange: 89543-12080
ABS2202 · 532569 · ALS2109 · 5S11269
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
ABS2202, 89543-12080, 532569, ALS2109, 5S11269
Frequently Asked Questions
Does the Delphi SS21646 sensor fit the 2016-2020 Toyota Mirai?
Yes. Delphi SS21646 is the front left ABS wheel speed sensor for the 2016-2020 Toyota Mirai, which takes one at that wheel. The front right is a separate part.
Does the Delphi SS21646 come with an instruction sheet?
Yes. Delphi SS21646 ships as one ABS wheel speed sensor with an instruction sheet. Nothing else is listed in the package.
Are the connectors on this wheel speed sensor plated?
Yes. The connectors are plated to help prevent corrosion and failures commonly caused by internal and cable short circuits.
How do I know if a front left wheel speed sensor is going bad?
A lit ABS or traction control warning light can mean the sensor has failed, but wiring or the sensor wheel could also be the cause. A shop can read the codes to tell.
Can Delphi SS21646 replace a sensor numbered 89543-12080?
Yes. 89543-12080 is one of the numbers Delphi SS21646 replaces. This one is for the front left wheel, so match the position as well.
