Delphi EG10535 exhaust gas recirculation (egr) valve for the 2010-2015 Toyota Prius 4-cylinder 1.8L and other vehicles routes exhaust gas back into the engine for accurate exhaust flow and emission control.
- Validated, tested and matched to the vehicle application
- High-temperature and corrosion-resistant materials made for engine environments
- Valve and seat are precision machined to help maintain long-term stability and performance
- No audible regulator noise
Quick facts
- Part: Delphi EG10535 exhaust gas recirculation (egr) valve
- Fits: 2010-2015 Toyota Prius 4-cylinder 1.8L and other vehicles
A rough idle, hesitation or an emissions warning light can be signs the EGR valve is worn or sticking. These signs alone do not prove the valve is at fault, since a vacuum leak can produce them too.
Fits
This valve is listed for a wide range of Toyota and Lexus models, including the 2012-2018 Toyota Prius v 4-cylinder 1.8L and the 2011-2017 Lexus CT200h 4-cylinder 1.8L. Open the "Vehicles it fits" section to check your exact model and engine.
Specifications
- Quantity per vehicle: 1
- Engine: L4-1.8L
- Gasket: included
- Spacers or washers: not required
In the box
One EGR valve, one gasket and one instruction sheet. This listing holds one valve, and a vehicle takes one.
Installation notes
- No spacers or washers are required, and the included gasket gives an exact fit, saving time and labor.
- The instruction sheet in the box covers the installation steps.
Interchange: 25620-37110 · 25620-37120
EGR1995 · 226908 · EGV1235 · 4F2075
This part cross-references / interchanges with the following part numbers:
EGR1995, 226908, EGV1235, 25620-37110, 25620-37120, 4F2075
Frequently Asked Questions
Is the Delphi EG10535 the right EGR valve for a 2010-2015 Toyota Prius 4-cylinder 1.8L?
Yes. Delphi EG10535 is listed for the 2010-2015 Toyota Prius 4-cylinder 1.8L. For another Toyota or Lexus model, check the exact year and engine in the "Vehicles it fits" section.
Does the Delphi EG10535 EGR valve come with a gasket and instructions?
Yes. Delphi EG10535 comes with one EGR valve, one gasket and one instruction sheet.
Do I need extra spacers or washers to install this EGR valve?
No. Spacers and washers are not required, because the gasket included with this EGR valve gives an exact fit and saves time and labor.
Is this EGR valve built from high-temperature, corrosion-resistant materials?
Yes. It is built from high-temperature and corrosion-resistant materials, and the valve and seat are precision machined to help maintain long-term stability and performance.
What signs can show an EGR valve is going bad?
A rough idle, hesitation or an emissions-related warning light can be signs of a worn EGR valve. A shop can test the valve to confirm.
