Delphi FP10382 fuel injection pressure regulator for the 1991-1995 Jeep Wrangler 4-cylinder 2.5L or 6-cylinder 4.0L and other vehicles regulates the fuel pressure supplied to the injectors. Two designs help meet emissions standards while covering a wide array of domestic vehicles.
- Precisely manufactured internal valves, diaphragms and springs for performance under all engine operating conditions
- Quiet operation with no audible regulator noise
- Nitrile™ diaphragms resist high-ethanol fuels and are made for longer life and a wide range of fuels
- Consistent, predictable fuel pressure throughout the system's range of control
Quick facts
- Part: Delphi FP10382 fuel injection pressure regulator
- Fits: 1991-1995 Jeep Wrangler 4-cylinder 2.5L or 6-cylinder 4.0L and other vehicles
- Condition: New
A worn regulator can show up as hard starting, a rough idle or poorer fuel economy. Those signs alone do not prove the regulator is at fault, since a clogged fuel filter can also lower fuel pressure. Each engine takes one regulator.
Fits
The 1991-1995 Jeep Wrangler 4-cylinder 2.5L or 6-cylinder 4.0L, the 1997-1998 Dodge Dakota 4-cylinder 2.5L and the 1993-1996 Jeep Grand Cherokee 6-cylinder 4.0L or V8 5.2L are among the vehicles this regulator fits. If your vehicle is not one of these, find its year and engine in the "Vehicles it fits" section.
Specifications
- Quantity per vehicle: 1
- Diaphragm: Nitrile™
- Condition: New
Interchange: 217-2150 · 5303 0001 · 800-322 · 255-1086
5G1119 · 23020 · PR210 · FIP210
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
217-2150, 5G1119, 23020, 5303 0001, 800-322, PR210, FIP210, 255-1086
Frequently Asked Questions
Does the Delphi FP10382 fit a 1997-1998 Dodge Dakota 4-cylinder 2.5L?
Yes. The Delphi FP10382 fuel injection pressure regulator is listed for the 1997-1998 Dodge Dakota 4-cylinder 2.5L.
Are the diaphragms in this Delphi fuel injection pressure regulator resistant to ethanol?
Yes. Its Nitrile™ diaphragms are resilient against high-ethanol fuels, and the diaphragm materials are made to work with a wide range of fuels.
Is the Delphi FP10382 regulator noisy when running?
No. It is made for quiet operation, with no audible regulator noise.
Can a failing fuel injection pressure regulator cause hard starting or a rough idle?
If the regulator is failing, it can show up that way, because it controls fuel pressure. A shop can test the pressure with the engine running.
Is 217-2150 an interchange number for the Delphi FP10382?
Yes. 217-2150 is listed as an interchange number for the Delphi FP10382, along with 800-322 and 255-1086.
