Delphi EX631092 fuel injector for the 2011-2016 Ford F-350 Super Duty V8 6.7L and other vehicles sprays diesel fuel into the cylinder. This Delphi fuel injector is built to OE specifications for fit, form and function.
- 100% O ring replacement
- No internal seal rings, which minimizes leakage
- Recessed fuel exit to minimize possible plugging
- Reduced spray variation and an accurate fuel spray pattern, which help with emissions and cold starting
- Draws manifold heat away from the fuel rail to thermally isolate fuel from the engine and limit hesitation from vapor lock
Quick facts
- Part: Delphi EX631092 fuel injector
- Fits: 2011-2016 Ford F-350 Super Duty V8 6.7L and other vehicles
- Condition: New
Hard cold starts, a rough idle or a fuel smell near the engine can mean an injector is failing. These signs alone do not prove the injector is at fault; a clogged fuel filter is one other common culprit. These trucks take four, and this listing is one injector.
Fits
The trucks it fits include the 2011-2016 Ford F-350 Super Duty V8 6.7L, the 2011-2016 Ford F-450 Super Duty V8 6.7L and the 2011-2016 Ford F-550 Super Duty V8 6.7L. Open the "Vehicles it fits" section to check your exact model and engine.
Specifications
Fit and size
- Engine: V8-6.7L
- Quantity per vehicle: 4
Build and materials
- System type: Light duty injector
- Condition: New
In the box
One fuel injector, one hold down bolt, one new injector pipe, one copper washer and one instruction sheet.
Interchange: BC3Z 9H529-A · BC3Z 9H529-C
0445117023 · 0986435415 · BC3Z9H529E
This part cross-references / interchanges with the following part numbers:
0445117023, 0986435415, BC3Z 9H529-A, BC3Z 9H529-C, BC3Z9H529E
Frequently Asked Questions
Is this the Ford F-350 Super Duty fuel injector for the 2011-2016 model with the V8 6.7L?
Yes. Delphi EX631092 fits the 2011-2016 Ford F-350 Super Duty V8 6.7L. Open the "Vehicles it fits" section to check your exact model and engine.
Do Delphi diesel injectors like the EX631092 come with a hold down bolt and injector pipe?
Yes. Delphi EX631092 comes with a hold down bolt, a new injector pipe, a copper washer and an instruction sheet.
Is the EX631092 a light duty injector?
Yes. Its system type is light duty injector, and this listing is sold as a single injector.
How can I tell if a diesel injector like this one is failing?
Hard cold starts, a rough idle or a fuel smell near the injector can mean it is failing. You can look for fuel leaks with the engine off and cool, and a shop can test the injector itself.
How are Delphi injectors tested?
Delphi tests all of its injectors using OE methodologies, including the EX631092.
