Keep fuel metering crisp and spray patterns clean with the Delphi Fuel Injector FJ10093, a standard-replacement gas injector that serves a wide range of Ford, Lincoln and Mercury V8s — including the 1985-1996 Ford Bronco [V8-5.0L], 1997-2003 Ford F-150 [V8-4.6L / V8-5.4L], 1997-2002 Ford Expedition [V8-4.6L / V8-5.4L], 2000-2003 Ford Excursion [V8-5.4L] and 1996-2004 Ford Mustang [V8-4.6L]. See the Buyer's Guide tab for the full list of 51 applications spanning the V8-4.6L, V8-5.0L, V8-5.4L and V8-5.8L engines.
Fresh sealing: ships with a 100% O-ring replacement (gasket or seal included) for a clean install.
Minimized leakage: built with no internal seal rings.
Anti-plugging: a recessed fuel exit helps minimize possible plugging.
Consistent delivery: reduced spray variation and an accurate fuel spray pattern are designed to support cleaner emissions and cold-start capability.
Vapor-lock protection: designed to draw manifold heat away from the fuel rail, thermally isolating the fuel to help reduce hesitation caused by vapor lock.
Every Delphi injector is tested using OE methodologies and produced in a Delphi ISO 9001:2008 certified facility. This unit has a metal-and-plastic body with a clip attachment method, a rectangular female connector and two male blade terminals; no mounting hardware, retainer clips, or wiring harness are included. The listed applications use eight injectors per engine, and this listing is for one injector (package includes the fuel injector and an instruction sheet). Country of origin: Thailand.
Manufacturer part number FJ10093.
Frequently Asked Questions
Which vehicles does the FJ10093 fit?
It fits many Ford, Lincoln and Mercury V8-4.6L, V8-5.0L, V8-5.4L and V8-5.8L applications, such as the F-150, Bronco, Expedition and Mustang. See the Buyer's Guide for the full 51.
How many injectors do I need?
The listed applications use eight injectors per engine. This listing is for one injector, so order the quantity your specific engine requires.
Does it come with a seal?
Yes — a gasket or seal is included and it ships with a 100% O-ring replacement. Mounting hardware, retainer clips and a wiring harness are not included.
What type of injector is this?
It is a standard-replacement light-duty gas fuel injector with a metal-and-plastic body, clip attachment, a rectangular female connector and two male blade terminals.
How is it tested and where is it made?
Every Delphi injector is tested using OE methodologies and produced in a Delphi ISO 9001:2008 certified facility. Country of origin: Thailand.
Fuel InjectorDelphi's history is one of OE heritage and quality. Our global technical requirements include design specifications and validation testing based on over 100 years of OE experience. Our...
Fuel InjectorDelphi's history is one of OE heritage and quality. Our global technical requirements include design specifications and validation testing based on over 100 years of OE experience. Our...
WARNING:
These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to
www.P65Warnings.ca.gov.
