Delphi FE0537 fuel pump and strainer set for the 2000-2006 BMW X5 V8 4.4L, the 2001-2006 X5 6-cylinder 3.0L and the 2002-2003 X5 V8 4.6L moves fuel from the tank to the engine. This Delphi fuel pump is built to Delphi's OE standards.
- Pump designed to operate under extreme temperatures with quick engine starts
- Helps restore fast pressure performance and system integrity with less energy
- Validated, tested and matched to the right vehicle application
- Lower amperage draw puts less load on the vehicle's electrical system
Quick facts
- Part: Delphi FE0537 fuel pump and strainer set
- Fits: the 2000-2006 BMW X5 V8 4.4L, the 2001-2006 X5 6-cylinder 3.0L and the 2002-2003 X5 V8 4.6L
- Condition: New
Hard starting, stalling or hesitation under load can be signs that a fuel pump is wearing out. Before you replace the set, rule out a blown fuse, a faulty relay or debris in the tank, since a new pump will not cure those.
Fits
This set is a direct-fit replacement for the 2000-2006 BMW X5 V8 4.4L, the 2001-2006 X5 6-cylinder 3.0L and the 2002-2003 X5 V8 4.6L, and each takes one set.
Specifications
- Quantity per vehicle: 1
- Type: fuel pump and strainer set
- Hardware: metal clamp
- Condition: New
In the box
One fuel pump and strainer set, one metal clamp and one instruction sheet.
Installation notes
- Check and clean the fuel tank before installing the pump.
- Replace the fuel strainer whenever the pump is replaced; the set supplies one.
- The instruction sheet in the box covers the steps.
Interchange: 16 11 6 755 043 · 152-1002
4020354 · E8412M · CFE0537 · 66088 · 67895 · P76601M · A30375 · E18518 · SP1303 · SP5072M
This part cross-references / interchanges with the following part numbers:
4020354, E8412M, CFE0537, 16 11 6 755 043, 152-1002, 66088, 67895, P76601M, A30375, E18518, SP1303, SP5072M
Frequently Asked Questions
Will this BMW X5 fuel pump replacement fit a 2001-2006 BMW X5 6-cylinder 3.0L?
Yes. Delphi FE0537 fits the 2001-2006 BMW X5 6-cylinder 3.0L, and that engine takes one set.
Does this Delphi fuel pump replacement come with a strainer and clamp?
Yes. Delphi FE0537 comes as a fuel pump and strainer set with one metal clamp and an instruction sheet.
Does this Delphi pump put less load on the electrical system?
Yes. Delphi FE0537 is designed with a lower amperage draw, so it places less load on the vehicle's electrical system.
Should I clean the fuel tank when installing this fuel pump and strainer set?
Yes. Check and clean the fuel tank before installing, and replace the strainer along with the pump; this set includes a strainer.
Can long cranking or stalling mean this fuel pump is worn?
Yes, they can be signs of a worn pump. A shop can test fuel pressure with the engine running, and a car that stalls should be checked promptly.
