Delphi FE0747 fuel pump and strainer set for the 2007-2013 BMW 328i 6-cylinder 3.0L and other vehicles moves fuel from the tank to the engine. The Delphi fuel pump in the set is built to Delphi's OE standards, and the strainer screens debris out of the fuel.
- Designed to operate under extreme temperatures with quick engine starts
- Lower amperage draw puts less load on the vehicle's electrical system
- Designed to bring back fast pressure performance and system integrity with less energy
- Validated and tested before it is matched to its application
Quick facts
- Part: Delphi FE0747 fuel pump and strainer set
- Fits: 2007-2013 BMW 328i 6-cylinder 3.0L and other vehicles
- Condition: New
Hard starting, sputtering or a loss of power can mean the pump is weakening. Before you replace the set, rule out the fuse, relay and wiring that feed the pump, since a fault there can mimic a failing pump.
Fits
The set is listed for a wide range of BMW models and works as a BMW 328i fuel pump replacement on 2007-2013 cars with the 6-cylinder 3.0L. The 2008-2013 BMW 128i 6-cylinder 3.0L takes one set, and the 2009-2013 BMW 328i xDrive 6-cylinder 3.0L is listed as well.
Specifications
Fit and size
- Quantity per vehicle: 1
- Engine: 6-cylinder 3.0L
Build and materials
- Type: fuel pump and strainer set
- Condition: New
In the box
One fuel pump and strainer set, one seal, one metal clamp and one instruction sheet.
Installation notes
- Check and clean the fuel tank before installing the new pump.
- The strainer should be replaced any time the fuel pump is repaired, and this set supplies one.
- The instruction sheet in the box covers the steps.
Interchange: 16 14 7 194 207
E8688M · DFE0747 · P77061M · A33240 · C0807M · SP5009M · SP5118M
This part cross-references / interchanges with the following part numbers:
E8688M, DFE0747, 16 14 7 194 207, P77061M, A33240, C0807M, SP5009M, SP5118M
Frequently Asked Questions
Is this the right BMW 328i fuel pump for a 2007-2013 car with the 6-cylinder 3.0L?
Yes. Delphi FE0747 is listed for the 2007-2013 BMW 328i 6-cylinder 3.0L. If yours is a different BMW, enter its year, model and engine in the "Vehicles it fits" section to check.
Can I use this as a 2011 BMW 328i fuel pump replacement with the 6-cylinder 3.0L?
Yes. The 2007-2013 BMW 328i 6-cylinder 3.0L range includes 2011, and each car takes one set.
Does the Delphi FE0747 come with a seal and clamp?
Yes. Delphi FE0747 includes the fuel pump and strainer, a seal, a metal clamp and an instruction sheet.
Do I need a separate strainer when I change this fuel pump?
No. The strainer is already in this set, and it should be replaced whenever the fuel pump is repaired. Check and clean the fuel tank first as well.
Is Delphi FE0747 interchangeable with P77061M?
Yes. P77061M is listed as an interchange number for this fuel pump and strainer set, along with E8688M, A33240 and several others.
