Delphi FE0842 fuel pump and strainer set for the 2016-2018 Mercedes-Benz GLE550e V6 3.0L and other vehicles is a Delphi fuel pump that feeds the engine from the tank.
- Pump designed to operate under extreme temperatures with quick engine starts
- Lower amperage draw puts less load on the vehicle's electrical system
- Designed to bring back fast pressure performance and system integrity using less energy
- Validated and tested for the application it is matched to
Quick facts
- Part: Delphi FE0842 fuel pump and strainer set
- Fits: the 2016-2018 Mercedes-Benz GLE550e V6 3.0L and other vehicles
- Condition: New
Hard starting, sputtering under load or a whine from the tank can mean a fuel pump is wearing out. Low pressure alone does not prove the pump is at fault, since a blown fuse or a weak relay can leave it underpowered too. If a worn pump is the cause, this set replaces it.
Fits
The 2016-2018 Mercedes-Benz GLE550e V6 3.0L, the 2013-2015 Mercedes-Benz E400 V6 3.5L and the 2015-2017 E400 V6 3.0L, and the 2017 Mercedes-Benz CLS400 V6 3.0L all take this set, and so do many other vehicles. Driving something else? Run your own year and engine through the "Vehicles it fits" section.
Specifications
- Quantity per vehicle: 1
- Condition: New
In the box
This listing holds one fuel pump and strainer set, and the vehicle takes one.
Installation notes
- Check the fuel tank and clean it before the new pump goes in.
- Replace the fuel strainer any time the fuel pump is repaired; this set pairs the two.
Interchange: 221 470 45 94
4020384 · SP1454
This part cross-references / interchanges with the following part numbers:
4020384, 221 470 45 94, SP1454
Frequently Asked Questions
Is this Delphi fuel pump assembly right for the 2016-2018 Mercedes-Benz GLE550e V6 3.0L?
Yes. Delphi FE0842 fuel pump and strainer set fits the 2016-2018 Mercedes-Benz GLE550e V6 3.0L, and that vehicle takes one.
Does this Delphi fuel pump replacement include the strainer?
Yes. Delphi FE0842 is sold as a fuel pump and strainer set, so the strainer comes together with the pump.
How much load does this Delphi pump put on the electrical system?
This Delphi pump is designed for lower amperage, so it draws less load on the vehicle's electrical system.
What symptoms can point to a worn fuel pump and strainer set?
Hard starting, sputtering under load or a whine from the tank can mean the pump is wearing. A shop can test fuel pressure to see where the problem lies.
Should I clean the tank when installing Delphi FE0842?
Yes. Check and clean the fuel tank first, and replace the strainer whenever the pump is repaired; Delphi FE0842 supplies both together.
