Delphi FG0920 fuel pump module for the 2007-2010 Toyota Sienna V6 3.5L and the 2011-2012 Sienna 4-cylinder 2.7L moves fuel from the tank to the engine. This Delphi fuel pump module assembly, also called a fuel pump assembly, includes the float arm and a seal.
- Empty float height and float retention set for a correct gas gauge reading
- Lower amperage draw puts less load on the electrical system
- Validated and tested, then matched to its application
- Design and durability behind lower failure rates
Quick facts
- Part: Delphi FG0920 fuel pump module
- Also called: fuel pump assembly
- Fits: 2007-2010 Toyota Sienna V6 3.5L and the 2011-2012 Sienna 4-cylinder 2.7L
- Condition: New
Hard starting, stalling or a gas gauge that reads wrong can mean the module is wearing out. A bad relay, a blown fuse or a worn fuel injector can be behind those signs too, so find the cause before you buy.
Fits
This module is a direct-fit replacement for the 2007-2010 Toyota Sienna V6 3.5L and the 2011-2012 Sienna 4-cylinder 2.7L, and each takes one. Delphi builds its fuel pumps to its OE standards.
Specifications
- Quantity per vehicle: 1
- Includes: float arm and seal
- Condition: New
In the box
One fuel pump module with float arm, a seal and an instruction sheet.
Installation notes
- Check and clean the fuel tank before installing the module.
- Use the instruction sheet for the installation steps.
Interchange: 950-0231 · 77020-08040 · 77020-08060 · 83320-08030
4010642 · E8757M · E8805M · CFG0920 · P76705M · A30430 · A46539 · C0685M · SP9022M · SP9023M · USEP8805M
This part cross-references / interchanges with the following part numbers:
4010642, E8757M, E8805M, CFG0920, P76705M, 950-0231, A30430, A46539, C0685M, SP9022M, SP9023M, 77020-08040, 77020-08060, 83320-08030, USEP8805M
Frequently Asked Questions
Does the Delphi FG0920 fit the 2011-2012 Toyota Sienna 4-cylinder 2.7L?
Yes. Delphi FG0920 fits the 2011-2012 Toyota Sienna 4-cylinder 2.7L and also the 2007-2010 Sienna V6 3.5L, with one module per vehicle.
What is included with the Delphi fuel module?
Delphi FG0920 comes as a fuel pump module assembly with the float arm, a seal and an instruction sheet.
Does this Delphi module match the original float height?
Yes. Its empty float height and float retention match OE specifications, which gives a correct gas gauge reading.
Which signs can point to a worn Delphi fuel pump module?
An engine that cranks but will not start, sputtering under load or a whine from the tank can mean it. A shop can test fuel pressure, since that check needs the engine running.
Do I need to clean the tank before installing the Delphi FG0920?
Yes. Check and clean the fuel tank before the module goes in, and follow the instruction sheet that comes with the part.
