Delphi FG0938 fuel pump module for the 2005-2013 Toyota Corolla 4-cylinder 1.8L, the 2009-2011 Corolla 4-cylinder 2.4L and other vehicles carries fuel from the tank to the engine. It is built to Delphi's OE standards.
- Empty float height and float retention set to give a correct gas gauge reading
- Lower amperage draw puts less load on the vehicle's electrical system
- Validated, tested and matched to the right vehicle application
- Design and durability aimed at lower failure rates
Quick facts
- Part: Delphi FG0938 fuel pump module
- Also called: fuel pump assembly
- Fits: 2005-2013 Toyota Corolla 4-cylinder 1.8L, the 2009-2011 Corolla 4-cylinder 2.4L and other vehicles
- Condition: New
Hard starting, stalling or a gas gauge that reads wrong can mean a fuel pump assembly is wearing out. A clogged fuel filter, a bad relay or a dirty tank can be behind the same signs too, so find the cause before buying a new module.
Fits
It also fits the 2005-2013 Toyota Matrix 4-cylinder 1.8L, the 2009-2013 Matrix 4-cylinder 2.4L, the 2005-2010 Pontiac Vibe 4-cylinder 1.8L and the 2009-2010 Vibe 4-cylinder 2.4L. This listing is one module; the 2005-2010 Pontiac Vibe 4-cylinder 1.8L takes one, and so do the other vehicles.
Specifications
- Quantity per vehicle: 1
- Engine codes: L4-1.8L, L4-2.4L
- Condition: New
In the box
One fuel pump module with float arm, a seal and an instruction sheet.
Installation notes
- An instruction sheet comes with the module.
- Check and clean the fuel tank before installing.
Frequently Asked Questions
Does the Delphi fuel pump module assembly fit the 2009-2011 Toyota Corolla 4-cylinder 2.4L?
Yes. Delphi FG0938 fits the 2005-2013 Toyota Corolla 4-cylinder 1.8L and the 2009-2011 Corolla 4-cylinder 2.4L, one module per vehicle.
What comes with this Delphi fuel module?
Delphi FG0938 comes as one fuel pump module with a float arm, a seal and an instruction sheet.
Does the Delphi module match the original float height?
Yes. The empty float height and float retention match OE specifications, which gives a correct gas gauge reading.
Does the Delphi fuel pump module put less load on the electrical system?
Yes. Its lower amperage draw puts less load on the vehicle's electrical system.
Should I clean the fuel tank before installing this fuel pump module?
Yes. Check and clean the fuel tank before installing the module. An instruction sheet comes in the box.
