Delphi FG1651 fuel pump module for the 2013-2016 Mazda CX-5 4-cylinder 2.0L, the 2014 CX-5 4-cylinder 2.5L and the 2016 CX-5 4-cylinder 2.5L carries fuel from the tank to the engine. This Delphi fuel pump module assembly, also called a fuel pump assembly, is built to Delphi's OE standards.
- Lower amperage draws less load on the electrical system
- Empty float height and float retention set for a correct gas gauge reading
- Validated, tested and matched to the right vehicle application
- Lower failure rates from the module's design and durability
Quick facts
- Part: Delphi FG1651 fuel pump module
- Also called: fuel pump assembly
- Fits: 2013-2016 Mazda CX-5 4-cylinder 2.0L, the 2014 CX-5 4-cylinder 2.5L and the 2016 CX-5 4-cylinder 2.5L
- Condition: New
Hard starting, stalling or a fuel gauge that reads wrong can mean the pump or float is worn, but a blown fuse or a loose connector can show up the same way, so look those over by eye with the ignition off first. If the module is the cause, this one replaces it.
Fits
This Delphi fuel pump module fits the 2013-2016 Mazda CX-5 4-cylinder 2.0L, the 2014 CX-5 4-cylinder 2.5L and the 2016 CX-5 4-cylinder 2.5L, and each takes one.
Specifications
- Quantity per vehicle: 1
- Condition: New
- Country of origin: Thailand
In the box
One fuel pump module with float arm, seal, bolts and washers, and an instruction sheet.
Installation notes
- Check and clean the fuel tank before installing the module.
- The instruction sheet in the box covers the installation steps.
Interchange: PE01-13-35X · PE01-13-ZE1
4010998 · E9209M · CFG1651 · P77098M · A33252 · SP4095M · USEP9209M
This part cross-references / interchanges with the following part numbers:
4010998, E9209M, CFG1651, P77098M, A33252, PE01-13-35X, PE01-13-ZE1, SP4095M, USEP9209M
Frequently Asked Questions
Is the Delphi FG1651 fuel pump module right for the 2014 Mazda CX-5 4-cylinder 2.5L?
Yes. Delphi FG1651 fits the 2014 Mazda CX-5 4-cylinder 2.5L, and each CX-5 it fits takes one module.
What does the Delphi fuel module FG1651 include besides the pump?
Delphi FG1651 comes with a float arm, a seal, bolts and washers, and an instruction sheet.
Will the float on this module give a correct gas gauge reading?
Yes. Its empty float height and float retention match OE specifications, which is intended to give a correct gas gauge reading.
Which symptoms can go with a worn fuel pump module?
Sputtering at highway speed or a whine from the tank can be signs, and so can an erratic fuel gauge. A shop can test fuel pressure safely.
What should I do to the fuel tank before fitting this Delphi module?
Check the fuel tank and clean it before installing the module. The instruction sheet in the box covers the steps.
