Delphi Fuel Pump Module Assembly P/N:FG1302
Delphi FG1940 fuel pump module for the 2004-2005 Cadillac CTS V8 5.7L, the 2004-2007 CTS V6 3.6L, the 2005-2007 CTS V6 2.8L, the 2006-2007 CTS V8 6.0L and other vehicles delivers fuel from the tank to the engine. This Delphi fuel pump module assembly, also called a fuel pump assembly, carries the pump and the float arm in one unit. It is built to Delphi's OE standards, and its empty float height and float retention match OE specifications.
Hard starting, sputtering under load or a fuel gauge that reads wrong can come from several causes, and the fuel pump module is only one of them. Before you replace the module, rule out a blown fuse, a failed relay, damaged wiring or a clogged filter, since each can produce similar symptoms. A shop can test fuel pressure for you.
Besides the Cadillac CTS years named above, it is a direct-fit replacement for the 2005-2007 Cadillac STS V6 3.6L or V8 4.6L, and a single module goes in each car.
One fuel pump module with float arm, seal, splices, wire harness and an instruction sheet.
Interchange: M100163 · M10161 · MU1679 · MU2212 · 4010470 · E3691M · E3692M · DFG1940 · 67518 · P76253M · 19120685 · 19151144 · 19151145 · 19167806 · 19206466 · 19206468 · 19330301 · 19417965 · 21997423 · 25766500 · 88965808 · 88965811 · C0254M · A30365 · SP6033M · SP6099M · USEP3691M
This part cross-references / interchanges with the following part numbers:
Is the Delphi fuel pump module right for the 2005-2007 Cadillac CTS V6 2.8L?
Yes. Delphi FG1940 fits the 2005-2007 Cadillac CTS V6 2.8L, and that vehicle takes one.
Does the Delphi module come with a float arm and wire harness?
Yes. Delphi FG1940 comes with the float arm, seal, splices, wire harness and an instruction sheet.
Will this fuel pump module give a correct gas gauge reading?
Its empty float height and float retention match OE specifications, which is meant to give a correct gas gauge reading.
Can a fuel gauge that reads wrong point to the fuel pump module?
It can. The module carries the float arm that reads fuel level, so a fault there can show on the gauge; a shop can confirm with a test.
Is there anything to do to the tank before installing the Delphi fuel module?
Yes. Check and clean the fuel tank first. Delphi FG1940 comes with an instruction sheet for the steps.
No reviews yet — be the first to review this product.
Write a ReviewWARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.