Delphi FG2816 fuel pump module for the 2017-2021 Volvo S90 4-cylinder 2.0L and other vehicles is a fuel pump module assembly that delivers fuel to the engine. Delphi builds it to its OE standards, and the float matches OE specifications.
- Correct gas gauge reading from the float's empty height and float retention
- Lower amperage draw puts less load on the vehicle's electrical system
- Validated, tested and matched to the right vehicle application
- Design and durability for lower failure rates
Quick facts
- Part: Delphi FG2816 fuel pump module
- Also called: fuel pump assembly
- Fits: 2017-2021 Volvo S90 4-cylinder 2.0L and other vehicles
- Condition: New
Hard starting, sputtering or a fuel gauge that reads wrong can mean a worn fuel pump assembly, but those signs can have other causes. With the engine off, look over the fuse and the wiring connector first; a shop can test fuel pressure. If the fuel pump module is the cause, this one replaces it.
Fits
The 2017-2021 Volvo S90 4-cylinder 2.0L, the 2018-2021 Volvo V90 4-cylinder 2.0L and the 2019-2021 Volvo S60 4-cylinder 2.0L fit this fuel pump module, and so do other Volvo models; each takes one. Open the "Vehicles it fits" section to check your own Volvo's exact model and engine.
Specifications
- Quantity per vehicle: 1
- Condition: New
- Country of origin: Thailand
In the box
One fuel pump module with float arm, seal, splices, wire harness and instruction sheet.
Installation notes
- An instruction sheet comes with the module for the steps.
- Check and clean the fuel tank during installation.
Interchange: 31355907-0
31355907
Frequently Asked Questions
Is the Delphi FG2816 fuel pump module right for the 2018-2021 Volvo V90 4-cylinder 2.0L?
Yes, Delphi FG2816 fits the 2018-2021 Volvo V90 4-cylinder 2.0L. For another Volvo, open the "Vehicles it fits" section and check the exact model and engine.
Does this Delphi fuel module come with the float arm and wire harness?
Yes, Delphi FG2816 includes the float arm, seal, splices, wire harness and instruction sheet along with the fuel pump module.
Is the Delphi module's float matched for an accurate gas gauge?
Yes. This fuel pump module's empty float height and float retention match OE specifications, for a correct gas gauge reading.
Should I clean the tank before fitting the Delphi fuel pump module?
Yes. Check and clean the fuel tank when installing this module. An instruction sheet comes with it for the steps.
Does Delphi FG2816 replace number 31355907-0?
Yes, 31355907-0 is a listed interchange number for Delphi FG2816, and the full interchange list is on this page.
