Delphi FL0464 fuel tank sending unit for the 1987-1993 Ford Mustang 4-cylinder 2.3L, the 1987-1995 Mustang V8 5.0L, the 1994-1997 Mustang V6 3.8L and the 1996-1997 Mustang V8 4.6L reads the fuel level in the tank and passes it to the gas gauge. This Delphi fuel tank sending unit is built to Delphi's OE standards.
- Empty float height and float retention set to specification for correct gas gauge reading
- Sending unit is validated and tested
Quick facts
- Part: Delphi FL0464 fuel tank sending unit
- Fits: 1987-1993 Ford Mustang 4-cylinder 2.3L, the 1987-1995 Mustang V8 5.0L, the 1994-1997 Mustang V6 3.8L and the 1996-1997 Mustang V8 4.6L
- Condition: New
A gas gauge that reads wrong, sticks or swings can mean the sending unit is worn. Wiring or the gauge itself can produce the same readings, so find the cause before replacing it. With the engine off, look over the gauge wiring connections you can see for corrosion or damage, and leave any test that opens the fuel system to a shop.
Fits
It is a direct-fit replacement for the 1987-1993 Ford Mustang 4-cylinder 2.3L, the 1987-1995 Mustang V8 5.0L, the 1994-1997 Mustang V6 3.8L and the 1996-1997 Mustang V8 4.6L.
Specifications
- Quantity per vehicle: 1
- Condition: New
In the box
One fuel tank sending unit, one seal, one lock ring and one instruction sheet. This listing holds one sending unit, and the Mustang takes one.
Installation notes
- Check and clean the fuel tank during installation.
- The instruction sheet in the package covers the steps.
Interchange: 4017009 · DFL0464 · E7ZZ9275A · FG164A
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
4017009, DFL0464, E7ZZ9275A, FG164A
Frequently Asked Questions
Does this Mustang fuel tank sending unit fit the 1996-1997 model with the V8 4.6L engine?
Yes. Delphi FL0464 fits the 1996-1997 Ford Mustang V8 4.6L, and that Mustang takes one sending unit.
Does the Delphi FL0464 sending unit come with a seal and lock ring?
Yes. The package holds the fuel tank sending unit, a seal, a lock ring and an instruction sheet.
Is the float on this sending unit set for an accurate gas gauge?
Yes. Its empty float height and float retention match OE specifications, which is meant to give a correct gas gauge reading.
What can a failing sending unit do to the gas gauge?
A failing sending unit can make the gauge read wrong, stick or swing around. A shop can test the sending unit to confirm it.
Should the fuel tank be cleaned when installing this sending unit?
Yes. The tank should be checked and cleaned when the sending unit goes in, and the included instruction sheet covers the steps.
