Delphi ES10596 oxygen sensor for the 2010-2011 Jeep Wrangler V6 3.8L, the 2012-2017 Wrangler V6 3.6L and other vehicles reads the oxygen in the exhaust so the engine computer can adjust the air-fuel ratio. This Delphi oxygen sensor is listed in front and rear positions, and which one your car needs depends on the application.
- Delphi planar technology covers older, conical design sensors
- Smart design consolidates SKUs without using long wires
- Patented protective sensor coating helps prevent contamination
- Validated for all fuel types, including ethanol blends like E85
- Tested to 150,000 miles, plus 2,000 hours of severe thermal testing
Quick facts
- Part: Delphi ES10596 oxygen sensor
- Fits: the 2010-2011 Jeep Wrangler V6 3.8L, the 2012-2017 Wrangler V6 3.6L and other vehicles
- Position: Front, front left, front right, rear, rear left, rear right
- Condition: New
A check engine light, rough running or poor fuel economy can mean an oxygen sensor is wearing out, but other faults can look alike. Before you replace the sensor, have the stored codes read and rule out exhaust leaks and wiring or connector damage.
Fits
This sensor is listed for a wide range of Jeep, Ram, Dodge, Chrysler and Mercedes-Benz models. That includes the 2012-2018 Ram 1500 V8 5.7L. As a Jeep Grand Cherokee oxygen sensor it covers the 2012-2021 V8 6.4L, the 2013-2022 V6 3.6L and the 2018-2021 V8 6.2L. If your car is not named here, look up its year, model and engine in the "Vehicles it fits" section.
Specifications
Fit and size
- Position: front, front left, front right, rear, rear left or rear right, depending on the vehicle
- Quantity per vehicle: 1 or 2, depending on the application
Build and materials
- Sensor technology: planar
- Condition: New
In the box
One oxygen sensor and one instruction sheet. This listing is one sensor, and depending on the application the vehicle takes one or two.
Frequently Asked Questions
Is this a Ram 1500 oxygen sensor for the 2012-2018 V8 5.7L?
Yes. Delphi ES10596 is listed for the 2012-2018 Ram 1500 V8 5.7L, which takes one sensor (two in 2014). For other cars, use the "Vehicles it fits" section.
Is this a 2012 Jeep Wrangler oxygen sensor replacement with the V6 3.6L?
Yes. Delphi ES10596 is listed for the 2012-2017 Jeep Wrangler V6 3.6L, and that engine takes one sensor.
What comes with the Delphi ES10596 sensor?
The listing holds one oxygen sensor and an instruction sheet. Depending on the application, the vehicle takes one or two sensors.
Can this oxygen sensor run on E85 ethanol blends?
Yes. The sensor is validated for all fuel types, including ethanol blends like E85.
How is the ES10596 sensor tested?
It is OE tested to 150,000 miles, with 2,000 hours of severe thermal testing added.
