Delphi TL2055 front center link for the 2011-2025 Chevrolet Silverado 2500 HD and other vehicles ties the front steering linkage together and passes steering motion on to the wheels.
- Ball studs machined to micron tolerances for durability and smooth joint operation
- Center link fatigue tested to avoid failure
- Anti-corrosion protection applied to each part
- Withstands temperatures below -40 degrees C and over 120 degrees C, with 720 hours of salt spray exposure
- Necessary accessories included with the center link
Quick facts
- Part: Delphi TL2055 center link
- Also called: steering center link
- Fits: 2011-2025 Chevrolet Silverado 2500 HD and other vehicles
- Position: Front
- Condition: New
A worn center link can show up as loose or wandering steering, play in the steering wheel or a clunk from the front end. Wear in the idler arm, tie rods or other steering parts can look just like it, so have a shop measure the play in the linkage and find the cause before you replace this one.
Fits
Chevrolet and GMC models are covered, led by the 2011-2025 Chevrolet Silverado 3500 HD and the 2011-2025 GMC Sierra 2500 HD, and each of them takes one. If yours is not named here, open the "Vehicles it fits" section to check your exact model and engine.
Specifications
Fit and size
- Position: Front
- Quantity per vehicle: 1
Build and materials
- Condition: New
- Ball studs: machined to micron tolerances
- Finish: anti-corrosion protection on each part
- Accessories: necessary accessories included
In the box
One center link with the necessary accessories.
Interchange: 19256657 · 20777181 · 22913603 · 84467786 · DS300082 · GS509116 · MS509116
This part cross-references / interchanges with the following part numbers:
19256657, 20777181, 22913603, 84467786, DS300082, GS509116, MS509116
Frequently Asked Questions
Does the Delphi TL2055 center link fit the 2011-2025 Chevrolet Silverado 3500 HD?
Yes. Delphi TL2055 is listed for the 2011-2025 Chevrolet Silverado 3500 HD, and that truck takes one front center link.
Does Delphi TL2055 come with the accessories needed for the job?
Yes. Delphi supplies the necessary accessories with TL2055, so the front center link arrives with what the job calls for.
How is this front center link tested for temperature and corrosion?
Delphi steering parts are tested below -40 degrees C and over 120 degrees C and exposed to 720 hours of salt spray. The center link is also fatigue tested to avoid failure.
Are the ball studs on this Delphi center link machined to a set tolerance?
Yes. The ball studs on Delphi TL2055 are machined to micron tolerances for durable, smooth joint movement.
Is 22913603 interchangeable with Delphi TL2055, the steering center link?
Yes. 22913603 is listed as an interchange number for Delphi TL2055, a front center link.
