Keep your steering linkage working as one unit with the Delphi Center Link TL485, which carries motion from the steering box across the linkage to the tie rods. It fits many vehicles, among them the 1995-2005 Chevrolet Blazer, 1982-2003 Chevrolet S10 and 1991-2003 GMC Sonoma. See the "Vehicles it fits" section for the full list.
Delphi's OE safety technology is fitted to millions of vehicles worldwide, and the company applies that OE expertise to its aftermarket steering range. Its dimensional and material analysis is aimed at matching the aftermarket part closely to the original, and Delphi includes the accessories needed for the job.
- Tested to extremes: built to withstand temperatures below -40°C and above 120°C, and exposed to 720 hours of salt spray.
- Precision ball studs: machined to micron tolerances for durability and smooth joint operation.
- Fatigue tested: Delphi center links go through fatigue testing to help avoid failure.
- Anti-corrosion protection: applied to each part to help prevent corrosion and improve appearance.
Signs this part may need replacing include loose or wandering steering, extra play at the steering wheel, clunking over bumps and uneven tire wear. These symptoms can have other causes, so inspect the steering linkage first. If a worn center link is the cause, TL485 replaces it. Have the wheel alignment checked after installation.
Interchange: 626.663 · 8-12386-615-0
626663 · 8123866150 · 12386615 · 12541400 · 14067587 · 26034085 · 26047201 · 26234085 · D1047 · D1047XL · DS1047 · GDS1047 · MDS1047 · JTY7008
This part cross-references / interchanges with the following part numbers:
626.663, 12386615, 12541400, 14067587, 26034085, 26047201, 26234085, 8-12386-615-0, D1047, D1047XL, DS1047, GDS1047, MDS1047, JTY7008
Frequently Asked Questions
Will this S10 center link fit my 1982-2003 Chevrolet S10?
Yes. Delphi TL485 is listed for the 1982-2003 Chevrolet S10. Check your exact vehicle in the "Vehicles it fits" section before ordering.
What does a steering center link do?
It joins the steering linkage and carries motion from the steering box's pitman arm to the tie rods so the wheels turn together.
What are signs a center link may need replacing?
Common signs include loose or wandering steering, extra play at the wheel, clunking over bumps and uneven tire wear. Other parts can cause these symptoms, so inspect the linkage first.
How does Delphi test this center link?
Delphi tests its steering parts at temperatures below -40°C and above 120°C and exposes them to 720 hours of salt spray. Its center links are also fatigue tested.
Do I need an alignment after installing it?
A wheel alignment check is generally recommended after replacing steering linkage parts. Follow the vehicle service information for installation steps and fastener torque.
