Delphi TA5471 front tie rod end for the 2006-2010 BMW 550i and other vehicles connects the steering linkage to the steering knuckle. This Delphi tie rod end, also called a steering tie rod end assembly, pivots on a ball stud.
- Tested at temperatures below -40 degrees C and above 120 degrees C, and exposed to 720 hours of salt spray
- Comes with the accessories needed to complete the job
- Ball studs machined to micron tolerances for durability and smooth joint operation
- Delphi tie rod fatigue tested to avoid failure
- Anti-corrosion protection applied to each part
Quick facts
- Part: Delphi TA5471 tie rod end
- Also called: steering tie rod end assembly
- Fits: 2006-2010 BMW 550i and other vehicles
- Position: Front
- Condition: New
A worn tie rod end can show up as loose or wandering steering, a clunk when turning or uneven front tire wear. Before you replace it, rule out other front-end wear such as ball joints, bushings or wheel bearings, which can feel similar, and have a shop sort out where the play is coming from.
Fits
This front tie rod end goes on the 2006-2010 BMW 550i, the 2006-2010 BMW 650i, the 2006-2010 BMW M5 and other models. The 2006-2010 BMW 550i takes two; this listing is one tie rod end, and the other one on the front axle is normally replaced at the same time.
Specifications
- Position: Front
- Quantity per vehicle: 2
- Condition: New
Interchange: 101-5810
31356774347 · TA14215 · TA14215PR · ES800664A · MS10637 · JRA592
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
31356774347, 101-5810, TA14215, TA14215PR, ES800664A, MS10637, JRA592
Frequently Asked Questions
Is the Delphi TA5471 right for the 2006-2010 BMW 550i?
Yes, Delphi TA5471 is a front tie rod end for the 2006-2010 BMW 550i, and it also fits the 2006-2010 BMW 650i and 2006-2010 BMW M5. If your car is a different model, look it up in the "Vehicles it fits" section.
Does the Delphi TA5471 have corrosion protection?
Yes. Delphi TA5471 has anti-corrosion protection applied to each part, and Delphi tie rods are exposed to 720 hours of salt spray in testing.
How do I tell if a front tie rod end is worn?
Look for loose or vague steering, a clunk when turning or uneven front tire wear. A shop can measure play in the joint, and a worn steering part should be replaced promptly.
Is a Delphi track rod end the same as a tie rod end?
Yes, track rod end is another name for a tie rod end. This listing is Delphi TA5471, one front tie rod end that connects the steering linkage to the knuckle.
Does the Delphi TA5471 replace the JRA592?
Yes. JRA592 is one of the numbers this Delphi TA5471 front tie rod end replaces; the others, including 101-5810 and MS10637, are on the Interchange line.
