Delphi TA5499 front tie rod end for the 2009-2010 BMW 528i xDrive and other vehicles connects the steering gear to the front wheel. This Delphi tie rod end is also called a steering tie rod end assembly.
- Tested below -40 °C and above 120 °C and through 720 hours of salt spray
- Ball studs machined to micron tolerances for durability and smooth joint operation
- Fatigue tested to avoid failure
- Anti-corrosion protection applied to each part
Quick facts
- Part: Delphi TA5499 tie rod end
- Also called: steering tie rod end assembly
- Fits: 2009-2010 BMW 528i xDrive and other vehicles
- Position: Front
- Condition: New
Loose or wandering steering, a clunk over bumps or uneven front tire wear can point to a worn tie rod end. Worn ball joints, control arm bushings or an out-of-spec alignment can be behind those signs too, so find the cause before you buy. Front tie rod ends are best changed as a pair; this listing is one, and the other side needs its own.
Fits
Beyond the 2009-2010 BMW 528i xDrive, this front tie rod end is a direct-fit replacement for the 2009-2010 BMW 535i xDrive and the 2008 BMW 528xi.
Specifications
Fit and size
- Position: Front
- Quantity per vehicle: 2
Build and materials
- Condition: New
- Corrosion protection: anti-corrosion protection applied to each part
In the box
One tie rod end with the necessary accessories for a complete job. These vehicles take two, so the second one is ordered separately.
Interchange: 32 21 6 777 451 · 101-6879 · 612.34015 · 612.34016
32216767861 · TA14245 · ES800647A · MS10741 · JRA603
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
32216767861, 32 21 6 777 451, 101-6879, 612.34015, 612.34016, TA14245, ES800647A, MS10741, JRA603
Frequently Asked Questions
Will this Delphi tie rod fit a 2009-2010 BMW 535i xDrive?
Yes. Delphi TA5499 is a front tie rod end for the 2009-2010 BMW 535i xDrive. If your car is not named on this page, look it up in the "Vehicles it fits" section.
Does the Delphi TA5499 come with accessories for the job?
Yes. This listing is one tie rod end with the necessary accessories for a complete job, and the vehicle takes two.
Is the Delphi track rod end the same part as a tie rod end?
Yes. Track rod end is another name for a tie rod end, and the Delphi TA5499 is the front version of that part.
How can I tell if a front tie rod end is worn?
Looser steering, a clunk over bumps or uneven front tire wear can mean a worn tie rod end. Have it checked promptly, since a shop can test the joints for play safely.
How is the TA5499 tested for corrosion and fatigue?
Delphi tie rods are fatigue tested to avoid failure. They are also exposed to 720 hours of salt spray and to temperatures below -40 °C and over 120 °C.
