Delphi TA1297 inner tie rod end for the 1984-1987 Honda Civic and other vehicles links the steering rack to the outer tie rod so steering input reaches the wheels. It is also sold as a steering tie rod end.
- Ball studs machined to micron tolerances for durability and smooth joint operation
- Fatigue tested to avoid failure
- Anti-corrosion protection applied to each part
- Tested below -40 degrees C and above 120 degrees C, and exposed to 720 hours of salt spray
Quick facts
- Part: Delphi TA1297 tie rod end
- Also called: steering tie rod end
- Fits: 1984-1987 Honda Civic and other vehicles
- Position: Inner
- Condition: New
Loose or wandering steering, a clunk over bumps or uneven tire wear can mean an inner tie rod end is worn. Before you replace it, rule out a worn outer tie rod end, a ball joint or a wheel bearing, since those can loosen the steering in a similar way.
Fits
This Delphi tie rod end fits the 1984-1987 Honda Civic, the 1986-1989 Acura Integra and the 1986-1987 Honda Wagovan. The 1984-1987 Honda Civic takes two. Plan to replace both sides together; this listing is one inner tie rod end.
Specifications
- Position: Inner
- Quantity per vehicle: 2
- Condition: New
In the box
One inner tie rod end with the necessary accessories for a complete job.
Interchange: 101-4034 · HN-A627 · 53521-SA5-000 · 53521-SB2-003 · 53521-SB2-013
53521SA2013 · AX07099 · IS180 · IS180PR · EV180 · GEV180 · MEV180
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
101-4034, HN-A627, 53521SA2013, 53521-SA5-000, 53521-SB2-003, 53521-SB2-013, AX07099, IS180, IS180PR, EV180, GEV180, MEV180
Frequently Asked Questions
Will the Delphi TA1297 work as a 1984-1987 Honda Civic tie rod?
Yes. Delphi TA1297 is an inner tie rod end that fits the 1984-1987 Honda Civic, and the Civic takes two.
Does this Integra tie rod end fit the 1986-1989 Acura Integra?
Yes. Delphi TA1297 fits the 1986-1989 Acura Integra, which also takes two.
Is this Delphi tie rod tested for temperature and corrosion?
Yes. The tie rods are tested below -40 degrees C and above 120 degrees C and exposed to 720 hours of salt spray. Each part also gets anti-corrosion protection.
How can I tell if an inner tie rod end is wearing out?
Loose or wandering steering, a clunk over bumps or uneven tire wear can point to a worn inner tie rod end. A shop can measure the play to confirm it.
Is the Delphi TA1297 an inner or an outer tie rod end?
The Delphi TA1297 is an inner tie rod end, so it sits at the steering rack side and is not the outer end.
