Delphi TA2041 left outer tie rod end for the 2003-2011 Saab 9-3 and other vehicles passes steering input from the steering linkage to the steering knuckle. Some catalogs list it as a steering tie rod end.
- Delphi tie rod end is fatigue tested to avoid failure
- Ball studs machined to micron tolerances for durability and smooth joint operation
- Tested at temperatures below -40 degrees C and over 120 degrees C, and exposed to 720 hours of salt spray
- Anti-corrosion protection applied to each part
Quick facts
- Part: Delphi TA2041 tie rod end
- Also called: steering tie rod end
- Fits: 2003-2011 Saab 9-3 and other vehicles
- Position: Left outer
- Condition: New
A worn tie rod end can show up as loose or wandering steering, a clunk over bumps or uneven tire wear. Before you replace it, rule out other worn steering or suspension parts, such as the inner tie rod or a wheel bearing, because they can give similar signs.
Fits
As a tie rod end for the 2003-2011 Saab 9-3, the 2010-2011 Saab 9-3X and the 2002-2009 Saab 9-5, this listing is the left outer end, and each car takes one per side. The right outer end on the same axle is a separate part and is normally replaced at the same time.
Specifications
Fit and size
- Position: Left outer
- Quantity per application: 1 per side
Build and materials
- Condition: New
- Corrosion protection: anti-corrosion treatment on each part
In the box
One left outer tie rod end with the accessories needed for the job.
Product information is for general reference and may contain errors. See our Disclaimer.
Frequently Asked Questions
Is the Delphi TA2041 tie rod end right for a 2010-2011 Saab 9-3X?
Yes. Delphi TA2041 is a left outer tie rod end for the 2010-2011 Saab 9-3X. The right outer end on that axle is a separate part.
Is this Delphi track rod end a left or right side part?
It is the left outer position. Delphi TA2041 is sold one per listing, so the right outer end is ordered separately.
Does this Delphi tie rod come with accessories?
Yes. Delphi includes the necessary accessories for a complete job with TA2041, alongside the left outer tie rod end itself.
What signs can show a left outer tie rod end is worn?
Loose or wandering steering, a clunk over bumps or uneven tire wear can come from a worn tie rod end. A shop can inspect the joint for play.
Does Delphi TA2041 have corrosion protection?
Yes. Anti-corrosion protection is applied to each Delphi TA2041, and the part is exposed to 720 hours of salt spray in testing.
