Keep the right side of your steering linkage connected to the wheel with the Delphi TA2084 right outer tie rod end, a direct-fit replacement for the 2003-2007 Honda Accord and 2004-2008 Acura TSX. It joins the tie rod to the steering knuckle and carries your steering input out to the wheel through a pivoting ball stud. If the right outer tie rod end on your 2003-2007 Honda Accord or 2004-2008 Acura TSX is worn, this unit replaces it.
Delphi's OE safety technology is fitted to millions of vehicles worldwide, and the company brings that OE expertise to every Delphi tie rod in its aftermarket steering range.
- Tested to the extreme: Delphi's steering parts withstand temperatures below -40°C and above 120°C and are exposed to 720 hours of salt spray. Extensive dimensional and material analysis supports compatibility between the OE and aftermarket part.
- Precision ball stud: machined to micron tolerances for durability and smooth joint operation.
- Fatigue tested: Delphi fatigue tests its tie rods to help prevent failure.
- Anti-corrosion protection: applied to each part for corrosion prevention and a cleaner appearance.
A tie rod end may need replacing if you notice loose or wandering steering, extra play in the steering wheel, clunking when turning or uneven tire wear. Diagnose the cause before replacing parts. Delphi packs the necessary accessories with the part to complete the job. Follow the vehicle service information for torque values, and have the alignment checked after installation.
Interchange: 101-5297 · 613.40069 · 53540-SDA-A01 · 53540-SDA-A02 · 534-955
ER10001 · TO59012 · TO59012XL · ES80287 · GES80287 · MES80287 · JTE7594 · 1015297 · 61340069 · 53540SDAA01 · 53540SDAA02 · 534955
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
101-5297, 613.40069, 53540-SDA-A01, 53540-SDA-A02, ER10001, 534-955, TO59012, TO59012XL, ES80287, GES80287, MES80287, JTE7594
Frequently Asked Questions
Will this tie rod fit my 2003-2007 Honda Accord?
The TA2084 is listed as the right outer tie rod end for the 2003-2007 Honda Accord and 2004-2008 Acura TSX. Check the "Vehicles it fits" section to confirm your exact vehicle.
What does a steering tie rod end do?
It connects the tie rod to the steering knuckle. It passes steering input from the rack to the wheel through a ball stud joint that pivots as the wheel turns and the suspension moves.
What signs mean a tie rod end may need replacing?
Common signs include loose or wandering steering, extra steering-wheel play, clunking when turning and uneven tire wear. Inspect the steering linkage to confirm the cause before replacing parts.
How is the Delphi tie rod end tested?
Delphi says its steering parts withstand temperatures below -40°C and above 120°C and are exposed to 720 hours of salt spray. Its tie rods are also fatigue tested.
Is anything needed after installing it?
Delphi includes the necessary accessories for the job. Torque the fasteners to the vehicle service specifications, and have a wheel alignment checked after replacing a tie rod end.
