Delphi TA2299 outer tie rod end for the 1996-2005 Chevrolet Blazer and other vehicles connects the steering linkage to the wheel so the wheel turns when you steer. This Delphi tie rod end sits at the outer end of the linkage and lets the joint pivot as the suspension moves.
- Tested at temperatures below -40 degrees C and over 120 degrees C and through 720 hours of salt spray
- Necessary accessories included for a complete job
- Ball studs machined to micron tolerances for durability and smooth joint operation
- Fatigue tested to avoid failure
- Anti-corrosion protection applied to each part
Quick facts
- Part: Delphi TA2299 tie rod end
- Also called: steering tie rod end
- Fits: 1996-2005 Chevrolet Blazer and other vehicles
- Position: Outer
- Condition: New
A worn steering tie rod end can show up as loose or wandering steering, a clunk when turning or uneven tire wear. Before you replace it, rule out tire condition, wheel alignment and other worn steering or suspension parts, since those also show up as wandering or uneven wear.
Fits
Vehicles it fits include the 1996-2005 Chevrolet Blazer, the 1996-2003 Chevrolet S10 4-cylinder 2.2L or V6 4.3L and the 1996-2003 GMC Sonoma 4-cylinder 2.2L or V6 4.3L, and each takes two of these outer ends. The outer ends on both sides are normally replaced together; this listing is a single tie rod end. Open the "Vehicles it fits" section to check your exact model and engine.
Specifications
Fit and size
- Position: Outer
- Quantity per vehicle: 2
- Sold individually: 1 per listing
Build and materials
- Condition: New
- Ball studs: machined to micron tolerances
- Corrosion protection: applied to each part
Interchange: 101-6861 · 612.66018 · 8-26054-936-0
26054936 · T3379 · ES3379T · GES3379T · MES3379T · JTE1307
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
101-6861, 612.66018, 26054936, 8-26054-936-0, T3379, ES3379T, GES3379T, MES3379T, JTE1307
Frequently Asked Questions
Are these S10 tie rod ends right for a 1996-2003 Chevrolet S10 4-cylinder 2.2L or V6 4.3L?
Yes. Delphi TA2299 fits the 1996-2003 Chevrolet S10 4-cylinder 2.2L or V6 4.3L, and that truck takes two outer ends.
Does this Delphi tie rod come as one or as a pair?
One. This listing is a single outer tie rod end, and the vehicles it fits take two, one for each side.
What does a worn outer tie rod end feel like in the steering?
Loose or wandering steering, a clunk when turning or uneven tire wear can point to one. A shop can check the joint for play.
Is a Delphi track rod end the same as this outer tie rod end?
Yes. Track rod end is another name for a tie rod end, and Delphi TA2299 is an outer one.
Does Delphi TA2299 interchange with ES3379T?
Yes. ES3379T is one of the numbers on the Interchange line for Delphi TA2299, along with 101-6861 and T3379.
